SZW25‑64D‑3 Milling Machine Speed Control Switch FOR‑REV‑STOP Rotary Selector

SpecificationsMaterial: Plastic and MetalType: Three-stage SwitchModel: SZW25-64D-3Color: Yellow and BlackPower: 4.5KWRated Working Voltage: AC380VRated Insulation Voltage: 500VRated Working Voltage: DC220VConventional Heating Current: 25ARated Working Current: 12A; 0.27AUse Category: AC-15; DC-13Product Size: 6.4*6.4*4.2cm/2.52*2.52*1.65inPackage Size: 12*8*8.5cm/4.72*3.15*3.35inGross Weight: 0.2kg/0.44 lbsNet Weight: 0.18kg/0.39 lbsPackage Included1* Milling Machine Speed Control Switch

Specifications

Material: Plastic and Metal
Type: Three-stage Switch
Model: SZW25-64D-3
Color: Yellow and Black
Power: 4.5KW
Rated Working Voltage: AC380V
Rated Insulation Voltage: 500V
Rated Working Voltage: DC220V
Conventional Heating Current: 25A
Rated Working Current: 12A; 0.27A
Use Category: AC-15; DC-13
Product Size: Size: 12*8*8.5cm/4.72*3.15*3.35in
Gross Weight: 0.2kg/0.44 lbs
Net Weight: 0.18kg/0.39 lbs

Package Included

1* Milling Machine Speed Control Switch

Key Features

Thoughtful Design: High-quality silver alloy contacts have good electrical conductivity and are oxidation-resistant, which is high-performance to use.

Flexible Conversion: Each layer of its joints is lubricated, giving you the flexibility to spin with less effort.

Easy to Operate: With intelligent circuit matching, advanced technology, and an ergonomic STOP/REV/FOR knob, you can operate it well for milling machine speed control.

Compact and Lightweight: It\'s compact(2.52*2.52*1.65 inches) and lightweight (0.39 lbs), ensuring firm installation without taking up much space.

Simple Installation: The product is already assembled upon receipt and is easy to use after wiring, which is very time-saving and convenient!

Details

Rounded Corners: The rounded edges are comfortable to touch and improve the safety of use without scratching your hands.

Clear Signs: The clear labeling and marks on the switch allow you to operate with ease.

Application

It is suitable for most milling machines and machine tools with AC 50-60HZ, and rated voltage below AC380V or DC 220V. It can also be used as circuit control switches, test equipment switches, motor control switches, and master switches, signal changeover switches, or changeover switches for welding machines and other equipment.

Notes

1. Installation should be carried out in such a way that the ambient air temperature does not exceed 104°F, its average temperature over 24h does not exceed 95°F, and the lower limit of the ambient air temperature does not exceed 23°F.
2. The altitude of the installation site does not exceed 6561.68ft above sea level.
3. When the maximum temperature is 104°F, the relative humidity of the air does not exceed 50%, higher relative humidity can be allowed at lower temperatures, and special measures should be taken for occasional condensation due to temperature changes.
4. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.