|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
SUN HYDRAULICS CORP RVIALCV Pressure Control
$200.00

SUN HYDRAULICS CORP RVIALCV Pressure Control Ventable, pilot-operated, balanced piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast. - A remote pilot relief on port 3 (vent) will control the valve below its own setting.
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Relief valve setting must always be higher than pilot valve setting.
- Not suitable for use in load holding applications due to spool leakage.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining gpm480 L/min.Factory Pressure Settings Established at4 gpm15 L/min.Maximum Operating Pressure5000 psi350 barControl Pilot Flow15 - 20 in³/min.0,25 - 0,33 L/min.Response Time - Typical10 ms10 msMaximum Valve Leakage at 110 SUS (24 cSt)5 in³/min.@1000 psi80 cc/min.@70 barAdjustment - Number of Clockwise Turns to Increase Setting55Valve Hex Size1 5/8 in.41,3 mmValve Installation Torque350 - 375 lbf ft474 - 508 NmAdjustment Screw Internal Hex Size5/32 in.4 mmLocknut Hex Size9/16 in.15 mmLocknut Torque80 - 90 lbf in.9 - 10 NmModel Weight3.10 lb1,40 kgSeal kit - CartridgeViton: 990-019-006

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|