STM32F407ZGT6 STM32 Core Development Board STM32F103ZET6 System Learning Board

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

STM32F407ZGT6 STM32 Core Development Board STM32F103ZET6 System Learning Board Popular Popular

Product Introduction

Features1. High-performance cores: All adopt ARM Cortex cores, supporting M7 and M3 respectively, providing powerful computing power.
2. Large-capacity storage: 1MB Flash and 564KB/64KB RAM to meet the storage requirements of different applications.
3. Abundant peripheral interfaces: integrating a variety of communication interfaces such as CAN, USB, SPI, I2C, etc., with strong scalability.
4. Low-power design: with a variety of low-power modes to optimise power consumption and prolong the life of the device.
5. Comprehensive development support: provide rich development tools and software support to accelerate the product development process.STM32F103ZET6:
Product Description:
STM32F103ZET6 development board features high performance, rich peripheral interfaces, and a wide range of applications.STM32F103ZET6 is a high-performance 32-bit microcontroller (MCU) based on the ARM Cortex-M3 core. The following is a detailed description of its features.
Computing power:The chip adopts a highly efficient ARM Cortex-M3 core operating at up to 72 MHZ, providing good computing performance and data processing capabilities.
Storage resources: it has 1M KB of Flash programme memory and 64KB of SRAM data memory, which can meet the needs of most embedded applications.
Peripheral interfaces: It provides rich peripheral interfaces, including serial communication interfaces such as USARTSPI and 12C, as well as ADC and PWM outputs to facilitate communication and connection with other devices.
Low-power design: A variety of low-power modes are available, which can be adjusted according to actual application requirements to optimise power consumption and extend battery life.
Security:To protect critical data and system security, a hardware encryption engine and memory supporting code execution protection are provided.
Development tools support:STMicroelectronics provides a wealth of development tools and software support including STM32Cube software packages, IDEs, as well as routines, drivers, etc. to accelerate the product development and debugging process.Specification
Controller: 72MHz, 1M Flash, 64K SRAM
LCD interface: SPI interface
Memory expansion: TF card interface
Output device: User LED
Connector: SWD and serial port
Pushbuttons: user pushbutton, booto pushbutton, reset pushbutton
IO Pins: 108 IO pins
Operating temperature: -40~85°C
Dimension: 74.07mm*43.59mmSTM32F407ZGT6
Product Description:
The STM32H723ZGT6 is a high-performance, low-power microcontroller based on the Arm@Cortex@-M7 core with a main frequency of up to 550 MHz.The chip integrates digital signal processor (DSP) functionality with a floating-point unit (FPU) that supports both double-precision and single-precision data processing.The STM32H723ZGT6 provides up to 1MB of Flash memory and 564KB of RAM, supports a wide range of external memory interfaces, and features a rich set of enhanced I/Os and peripherals. It also includes advanced clock management, reset and power management functions, and a variety of communication interfaces such as CAN, USB, SPI and I2C etc. The STM32H723ZGT6 is suitable for a wide range of applications such as industrial automation, automotive electronics, smart home and provides comprehensive development and support tools!Specification
Main control chip: main frequency 550MHz, on-chip 1MB Flash, on-chip 564K SRAM
1 Typec interface
Memory expansion: TF card interface
LCD interface: SPI LCD
Camera interface: camera interface
IO pins: 108 I0 pins
Expansion W25Q64, capacity 8M bytes
1 reset button
1 BOOT button
Operating Temperature:-40~85°C
Size:74.07mm*43.59mmPackage Includes
1 x Development Board
2 x 30P double rows of pins (unsoldered/soldered pins optional)

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

• Home
• Electronic Component
• Chips
• Sensor
• Arduino Module
• Raspberry Pi

STM32F407ZGT6 STM32 Core Development Board STM32F103ZET6 System Learning Board

Product Introduction

Features1. High-performance cores: All adopt ARM Cortex cores, supporting M7 and M3 respectively, providing powerful computing power.
2. Large-capacity storage: 1MB Flash and 564KB/64KB RAM to meet the storage requirements of different applications.
3. Abundant peripheral interfaces: integrating a variety of communication interfaces such as CAN, USB, SPI, I2C, etc., with strong scalability.
4. Low-power design: with a variety of low-power modes to optimise power consumption and prolong the life of the device.
5. Comprehensive development support: provide rich development tools and software support to accelerate the product development process.STM32F103ZET6:
Product Description:
STM32F103ZET6 development board features high performance, rich peripheral interfaces, and a wide range of applications.STM32F103ZET6 is a high-performance 32-bit microcontroller (MCU) based on the ARM Cortex-M3 core. The following is a detailed description of its features.
Computing power:The chip adopts a highly efficient ARM Cortex-M3 core operating at up to 72 MHZ, providing good computing performance and data processing capabilities.
Storage resources: it has 1M KB of Flash programme memory and 64KB of SRAM data memory, which can meet the needs of most embedded applications.
Peripheral interfaces: It provides rich peripheral interfaces, including serial communication interfaces such as USARTSPI and 12C, as well as ADC and PWM outputs to facilitate communication and connection with other devices.
Low-power design: A variety of low-power modes are available, which can be adjusted according to actual application requirements to optimise power consumption and extend battery life.
Security:To protect critical data and system security, a hardware encryption engine and memory supporting code execution protection are provided.
Development tools support:STMicroelectronics provides a wealth of development tools and software support including STM32Cube software packages, IDEs, as well as routines, drivers, etc. to accelerate the product development and debugging process.Specification
Controller: 72MHz, 1M Flash, 64K SRAM
LCD interface: SPI interface
Memory expansion: TF card interface
Output device: User LED
Connector: SWD and serial port
Pushbuttons: user pushbutton, booto pushbutton, reset pushbutton
IO Pins: 108 IO pins
Operating temperature: -40~85°C
Dimension: 74.07mm*43.59mmSTM32F407ZGT6
Product Description:
The STM32H723ZGT6 is a high-performance, low-power microcontroller based on the Arm@Cortex@-M7 core with a main frequency of up to 550 MHz.The chip integrates digital signal processor (DSP) functionality with a floating-point unit (FPU) that supports both double-precision and single-precision data processing.The STM32H723ZGT6 provides up to 1MB of Flash memory and 564KB of RAM, supports a wide range of external memory interfaces, and features a rich set of enhanced I/Os and peripherals. It also includes advanced clock management, reset and power management functions, and a variety of communication interfaces such as CAN, USB, SPI and I2C etc. The STM32H723ZGT6 is suitable for a wide range of applications such as industrial automation, automotive electronics, smart home and provides comprehensive development and support tools!Specification
Main control chip: main frequency 550MHz, on-chip 1MB Flash, on-chip 564K SRAM
1 Typec interface
Memory expansion: TF card interface
LCD interface: SPI LCD
Camera interface: camera interface
IO pins: 108 I0 pins
Expansion W25Q64, capacity 8M bytes
1 reset button
1 BOOT button
Operating Temperature:-40~85°C
Size:74.07mm*43.59mmPackage Includes
1 x Development Board
2 x 30P double rows of pins (unsoldered/soldered pins optional)

• Payment must be received in 5 business days of sale closing.
• Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
• Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

• We maintain high standards of excellenceand strive for 100% customer satisfaction!response is very important to us. We request that you contact us immediately BEFORE you give us neutralor negativeresponse, so that we can satisfactorily address your concerns.

Refund

• All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
• If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
• If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.