|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
STM32F407VGT6 STM32F103C8T6/F407VET6 STM32 ARM Mini System Development CoreBoard
$12.61

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
if you have any problem,pls contact with us.
STM32F407VGT6 STM32F103C8T6/F407VET6 STM32 ARM Minisystem Development CoreBoard STM32F407VGT6 Development BoardDescription: Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSPinstructions Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) dataRAM – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memoriesLCD parallel interface, 8080/6800 modes Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1%accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibrationLow-power operation – Sleep, Stop and Standby modes – VBAT supply for RTC, 20×32 bit backupregisters + optional 4 KB backup SRAM 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleavedmode2×12-bit D/A converters General-purpose DMA: 16-stream DMA controller with FIFOs and burst support Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputDebug mode – Serial wire debug (SWD) & JTAGinterfaces – Cortex-M4 Embedded Trace Macrocell™ LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm)WLCSP90 LQFP176 (24 × 24 mm) Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/OsUp to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or externalclock – 2 × CAN interfaces (2.0B Active) – SDIO interfaceAdvanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII 8- to 14-bit parallel camera interface up to54 Mbytes/s True random number generator CRC calculation unit 96-bit unique ID RTC: subsecond accuracy, hardware calendar
Package Included: 1PC*STM32F407VGT6 Development Board STM32F4 Core407V ModuleCore407V is a small STM32 development board that features an STM32F407VET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F familyImportant Product Features: Onboard: SD card slot RTC Battery: CR1220 Wireless Communication: NRF2401 Interface Data storage: W25Q16 Support FMSC LCD Interface Multi-user keys All the CPU-10 lead 2.54mm integer multiples spacing pinSTM32F407VET6: the high performance STM32 MCU which features: Core: Cortex-M4 32-bit RISC Feature: a full set of single-cycle DSP instructions Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz Operating Voltage: 1.8V-3.6V Package: LQFP100 Storage Resources: 512kB Flash, 192+4kB SRAM Resource: 3 x SPI,3 x USART, 2 x UART, 2 x I2S, 3 x I2C; 1 x FSMC,1 x SDIO,2 x CAN; 1 x USB 2.0 FS/HS Controler(with DMA); 1 x USB HS ULPI; (used for external USB HS PHY)1 x 10/100 Ethernet MAC;1 x 8 to 12-bit parallel camera interface; 3 x AD(12 bit,1us),2 x DA(12 bit)
Package Included: 1 x STM32F407VET6 Board 10 x Dupont Cable 1 x Mini USB CableSTM32F103C8T6 Core Board 1.Control Chip:STM32F103C8T6 2.Operating Chip:5V 3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface 4.Flash:W25X16 5.EEPROM:ATMEL24C02
Package Included: 1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core BoardSTM32F030F4P6 Mini System Board This board is a STM32F030F4P6 Minimum System Board(Cortex-M0). The target MCU is STM32F030F4P6 that is provided by ST. It is a ARM 32-bit Cortex?-M0 CPU, frequency up to 48 MHz, high-speed embedded memories . As a minimal ready-to-run system, this board integrates micor USB power supply interface, ISP/SWD programming/debugging interface, boot mode selection and so on to take you into the ARM Cortex world easily.
Package Included: 1PC*STM32F030F4P6 ARM CORTEX-M0 Minimum System Development Board Core 32bit 48MHzShipping1.We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3.All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund. response1.We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help. 2.Please DON\'T leave negative or neutral response if you haven\'t received item in 30 days, because we have mentioned the shipping time repeatedly. Payment1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Return policy1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your ID and item number with any email requests. Contact us1. If you have any questions, please feel free to email our service specialists. 2.Just contact us using the \" Ask the seller a question\" link on . 3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. STM32F407VGT6 STM32F103C8T6/F407VET6 STM32 ARM Minisystem Development CoreBoardSTM32F407VGT6 Development BoardDescription: Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSPinstructions Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) dataRAM – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memoriesLCD parallel interface, 8080/6800 modes Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1%accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibrationLow-power operation – Sleep, Stop and Standby modes – VBAT supply for RTC, 20×32 bit backupregisters + optional 4 KB backup SRAM 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleavedmode2×12-bit D/A converters General-purpose DMA: 16-stream DMA controller with FIFOs and burst support Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder inputDebug mode – Serial wire debug (SWD) & JTAGinterfaces – Cortex-M4 Embedded Trace Macrocell™ LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm)WLCSP90 LQFP176 (24 × 24 mm) Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/OsUp to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or externalclock – 2 × CAN interfaces (2.0B Active) – SDIO interfaceAdvanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII 8- to 14-bit parallel camera interface up to54 Mbytes/s True random number generator CRC calculation unit 96-bit unique ID RTC: subsecond accuracy, hardware calendar
Package Included: 1PC*STM32F407VGT6 Development Board STM32F4 Core407V ModuleCore407V is a small STM32 development board that features an STM32F407VET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F familyImportant Product Features: Onboard: SD card slot RTC Battery: CR1220 Wireless Communication: NRF2401 Interface Data storage: W25Q16 Support FMSC LCD Interface Multi-user keys All the CPU-10 lead 2.54mm integer multiples spacing pinSTM32F407VET6: the high performance STM32 MCU which features: Core: Cortex-M4 32-bit RISC Feature: a full set of single-cycle DSP instructions Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz Operating Voltage: 1.8V-3.6V Package: LQFP100 Storage Resources: 512kB Flash, 192+4kB SRAM Resource: 3 x SPI,3 x USART, 2 x UART, 2 x I2S, 3 x I2C; 1 x FSMC,1 x SDIO,2 x CAN; 1 x USB 2.0 FS/HS Controler(with DMA); 1 x USB HS ULPI; (used for external USB HS PHY)1 x 10/100 Ethernet MAC;1 x 8 to 12-bit parallel camera interface; 3 x AD(12 bit,1us),2 x DA(12 bit)
Package Included: 1 x STM32F407VET6 Board 10 x Dupont Cable 1 x Mini USB CableSTM32F103C8T6 Core Board 1.Control Chip:STM32F103C8T6 2.Operating Chip:5V 3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface 4.Flash:W25X16 5.EEPROM:ATMEL24C02
Package Included: 1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core BoardSTM32F030F4P6 Mini System Board This board is a STM32F030F4P6 Minimum System Board(Cortex-M0). The target MCU is STM32F030F4P6 that is provided by ST. It is a ARM 32-bit Cortex?-M0 CPU, frequency up to 48 MHz, high-speed embedded memories . As a minimal ready-to-run system, this board integrates micor USB power supply interface, ISP/SWD programming/debugging interface, boot mode selection and so on to take you into the ARM Cortex world easily.
Package Included: 1PC*STM32F030F4P6 ARM CORTEX-M0 Minimum System Development Board Core 32bit 48MHzShipping1.We only ship to the confirmed address provided by . please make sure your address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3.All package need to wait 30 days,Please take care it.Less than 30 days,we can\'t take a refund. response1.We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help. 2.Please DON\'T leave negative or neutral response if you haven\'t received item in 30 days, because we have mentioned the shipping time repeatedly. Payment1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Return policy1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your ID and item number with any email requests. Contact us1. If you have any questions, please feel free to email our service specialists. 2.Just contact us using the \" Ask the seller a question\" link on . 3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. Am 13.01.2026 hat der Verkäufer die folgenden Angaben hinzugefügt:

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|