We are professional industrial&electronic Categorie manufacturers in China. We have been working in this field for almost 10 years!
Our products include all kits&welded products for Andruino, Raspberry Pi, or mini flights.
If you have any needs, pls contcact us for free, we will help you get all things you need.
Thank you !
Product View
MAIN PRODUCTS
STC-1000
LCR Transistor Tester
ESP8266 ESP-12F
Raspberry Pi
PH Meter
Relay Module
TL866II Plus
SG90
Product Details
Features1.STC89C52 is a high-speed / low-power / super anti-jamming / ultra-low-cost microcontroller, the instruction code is fully compatible with the traditional 8051 microcontroller, 12 clocks per machine cycle and 6 clocks per machine cycle can be intended to choose.
2.51 microcontroller development board using STC89C52RC-LQFP-44 main control chip, on-board USB to TTL serial chip CH340, easy to download programs and serial communication experiments.
3. Micro USB interface, comes with a download circuit a cell phone data line can be downloaded.
4. No welding pin, easy to design their own use, can be upward or downward welding pin, connected to the 2.54 pitch multi-purpose board and other applications.
5. Ultra-low power consumption design, normal operating mode 4mA-7mA, power-down mode can be woken up by an external interrupt, suitable for battery-powered systems, such as water meters, gas meters, portable devices.Specification
Operating voltage:5.5V-3.8V(5V microcontroller)
Operating frequency range:0~35MHz.
On-chip integrated 1280 bytes or 512 bytes RAM
Ultra-large capacity SRAM, up to 1280 bytes SRAM
Strong anti-interference.
1.Anti-static
2.4KV fast pulse interference (EFT test)
3. Wide voltage, not afraid of power jitter
4.Wide temperature range, -40℃-+85℃.
Ultra-low power consumption
1. Power-down mode: typical power consumption <0.1uA
2. Normal operation mode: 4mA-7mA
3. Power-down mode can be woken up by external interrupt, suitable for battery-powered systems, such as water meters, gas meters, portable devices, etc.
4. Programmable in the system, no need for programmer and emulator, can be upgraded remotely.
Size: 61mm*38mmNote
1. On the P0 port pull-up resistor, if you use the STC89C52 version, P0 port if you do the external output driver, you need to external pull-up resistor, do the general LCD bus such as LCD1602, LCD12864 bus, can be used directly, no external pull-up resistor.
2. Different batches, product appearance and pin color is slightly different, the same function!List
1 x Development Board
3 x Pin
- Payment Method
- Returns Policy
Payment Method
- We accept PayPal only. But we only Accept your Address,Please Make sure it\'s 100% right.
- Payment must be received in 5 business days of sale closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Returns Policy
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.