Listed the is the STACKABLE backlit text LCD 1602 (16x2 chars by 2 rows) SHIELD for the Arduino UNO board. It\'s completely assembled and ready to use,saving you a ton of time from soldering.
The male headers on the shield as shown in the phtoto. Just plug it onto the Arduio UNO board\'s female header rows of pins. If you have other stackable Arduino shields, you would want this shield to be the very top one, because it is a display shield.
Excellent price, considering on the LCD itself costs $7 per piece or $13 with shipping included.The design of this Arduino LCD 1602 shield is way beter than other ones seen, because:
- The I/O pins to the LCD are configurable via jumpers.
- The rest of the other Arduino pins are still accessible as if another Arduino board is stacked on top of your development Arduino board.
You can, of course, use this Arduino UNO shield without an Arduino board, for example, with your breadboard or other development board(s) by providing the VCC (5V) and GND to the shield. Then connect jump wires to the IO pins.
The I/O pins to interface with the LCD is configurable via jumpers. The LCD I/O pins are jumpered to the below Arduino UNO I/O pins by default. If you want to change an I/O pin, simply remove the jumper for that pin and use a female-female dupont wire to the connect to whatever I/O pin you want.
RS = 12, /E = 11, D4 = 6, D5 = 5, D6 = 4, D7 = 3
Notes:
- The shield\'s PCB color is whatever available at the time of purchase, although the photos show purple as the color.
- Backlit light can be blue/yellow/green.
- Upon purchase, I will point to the location of example Arduino UNO sketch for the LCD that display characters in the photo.
- On the official Arduino UNO R4 Wifi board, the power barrel is too far in than the Arduino UNO R3 board. This causes the shield to touch the end edge of the Arduino UNO R4 Wifi power barrel. The pins, however, make good contact, RETURNS/REFUND
- NO TECHNICAL SUPPORT PROVIDED
STANDARD DISCLAIMER:
I AM NOT RESPONSIBLE FOR YOUR PROJECT IN ANYWAY, THAT IS, ANY KIND OF DAMAGES TO YOUR MACHINE(S)/COMPUTER(S), INCLUDING BUT NOT LIMITED OF TO PHYSICAL, MENTAL, EMOTIONAL, PROPERTY-WISE, OR FINANCIALLY. NOR AM I RESPONSIBLE FOR ANY TECHNICAL SUPPORT. THIS IS JUST LIKE A BREAD BOARD THAT YOU USE WIH YOUR RESPONSIBILITY AND IMAGINATION. You MUST read and understand all the computer electrical characteristics on its peripherals, e.g., expansion slots, etc., before using the ampere you can use! Please research that on the internet! You MUST also understand all electrical characteristics of whatever ICs that you use. Read the datasheets! NO returns or refunds. Please note that the descriptions were provided to the best of quality. Not responsible for any typos.
PLEASE ASK QUESTIONS IF YOU\'RE IN DOUBT BEFORE offerDING OR BUYING!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.