Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

SOIC8 SOP8 Flash Chip IC CH341A USB Programmer Flash BIOS Chip USB Programmer Mo

SOIC8 SOP8 Flash Chip IC CH341A USB Programmer Flash BIOS Chip USB Programmer Mo
$18.34

Buy Now

Note for Test Clip:
1. The test clip can basically be used with many high-power programmers. When a programmer with a protected function is encountered, the clip cannot be read at normal voltage. You need to add a 3.3V voltage
How to use: Hold the chip first, and add a 3.3V voltage to the pin corresponding to the 8th pin of the chip. Generally, the 3.3V power supply has two wires, the VCC is connected to the clip, and the other wire is grounded
2. Do not forcibly press down when clamping, first open the clip and clip it from the left and right sides of the chip
When disassembling, please don’t pull it out directly. First separate the clips left and right, then take them out so that they won\'t break the tip of the clip
Products include:
1 x CH341A Programmer
1 x SOP8 Test Clip
1 x 8 Pin to 8 Pin Converter
2 x SOP8 SOP16 to 8 Pin Converter
2 x 2.54 mm 4 Pin header

  • Package includes: 1 CH341A programmer, 1 SOP8 test clip, 1 8Pin to 8 Pin converter, 2 SOP8 SOP16 to 8Pin converters, 2 2.54 mm 4 Pin connectors
  • Design: It can program the SOP8 chip online, no chip with circuit board is needed, which can save people\'s time. The SOP8 folder can program EEPROM online without disassembling the chip, so BIOS refreshing is simpler and more efficien
  • Features: Very suitable for amateur programmers 24 and 25 series FLASH. Use dedicated CH341A chip USB. USB1.1 communication. The erase programming speed is about 2 - 3 Mbit checks per minute.The programming speed is 2 - 3 times that of ordinary ATMEGA8 series programmers
  • Application: The main purpose of the CH341A programmer is to perform backup, erasure, programming, calibration and other operations on various software. SOIC8 SOP8 test clip, used for EEPROM 24CXX / 25CXX / 93CXX online programming
  • Note: Some chips are affected by peripheral circuits, so they cannot be trimmed directly. Please check the chip location on the motherboard before buying! Due to the characteristics of the CH341A chip, the ESMT SST 25 chip can only read but not write

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design