SHERWOOD S-7100A RECEIVER / Recapped / DeoxIt Controls / Dial String / Tested
$395.00

As a retired electrical engineer, I routinely work on vintage audio equipment to bring it back to life. Here is what has been done with this Sherwood s-7100A:
1.) Replace all electrolytic caps with ones meeting or exceeding original specs. Most are better than originals.2.) Replace dial string and pointer.3.) Treat controls with DeoxIt (no DeoxIt on the power switch portion of the volume control).4.) Clean the front panel and blow out dust from internals.5.) Test phono, aux, AM, FM, and tape monitor inputs. All working.6.) Test headphone, speaker A, speaker B outputs. All working.7.) Measure RMS power output at the onset of clipping (see scope pics).8.) Replace missing metal caps on Volume and Tuner dials with home brew version.9.) Repair hole on left, rear side of case. Not perfect. Used hard drying putty and wood grain furniture stickers.10.) Replaced non-working AM board with one from parts unit - now works perfectly.11.) Replaced noisy transistor on preamp board.12.) Replace filter capacitor with larger (3300uf) and added thermistor @ transformer primary to mitigate surge.13.) Power = (13.7VRMS x 13.7VRMS)/8 ohms = 23.5 RMS watts per channel @1KHZ both channels driven @8 ohms.
Please note, I ship only to the lower 48 US states via FedEx. Thanks for looking!

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.