|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
SHC31G Isolated USB To CAN Adapter FD Support Based On Canable 2.0 Pro
$38.65

SHC31G Isolated USB To CAN Adapter FD Support Based On Canable 2.0 Pro SHC31G Isolated USB To CAN Adapter FD Support Based On Canable 2.0 ProFast U.S. Delivery Carefully Packaged 30-Day Returns Secure CheckoutAbout the ProductDSD TECH SH-C31G Isolated USB to CAN FD Adapter: An industrial-grade adapter featuring dual signal/power isolation for noisy environments. Supports CAN FD (after firmware flash) and legacy CAN 2.0A/B protocols. Plug-and-play with USB Type-B and terminal block. Cross-platform compatible (Windows/Linux/macOS). Based on the open-source Canable 2.0 design. Ideal for automotive, industrial, and robotics applications.Key Features - Galvanic Isolation, Powered by Itself: A digital isolator breaks the signal path between the USB side and the CAN side, and an on-board DC-DC converter gives the CAN side its own 5 V and its own ground. Nothing external is needed to make the isolation work — no separate supply, no ground loop, and a fault on the vehicle bus stays on the vehicle bus. Terminal pin 3 is that isolated ground; do not tie it to your PC\'s ground.
- Open Source Hardware, Actually Published: We do not only build on open hardware — we publish our own design back. The full schematic and PCB layout for this exact board are on our GitHub (dsdtech-official) as editable design files, not pictures, under the CERN-OHL-S-2.0 licence, together with the firmware images. Every claim above is in that schematic. Go and check it.
- CAN FD at Full Speed, Out of the Box: No reflashing, no serial port, no separate mode to switch into — the candleLight build fitted at the factory carries CAN FD over the same gs_usb interface as classic CAN, at data rates up to 5 Mbit/s with 64-byte frames. Same microcontroller and same firmware as our SH-C31A, tested on this board with the isolation in circuit. Units produced from September 2026 ship with our current build, v1.4.
- Built for a Real Bus: A 4-pin 5.0 mm screw terminal instead of jumper wires — CAN_L, CAN_H, isolated ground, and isolated +5 V that can feed a small node on the bus side. A 120 ohm termination switch is built in, so you can switch it off on a bus that already has two. Each CAN line runs through a resettable fuse and a TVS clamp, and the USB side has one of its own.
- About DSD TECH: Established in 2010, DSD TECH specializes in industrial connectivity solutions, delivering 80+ products (USB/RS232/UART/RS485/CAN) to 100,000+ global clients across automation and communication sectors. Every device comes with lifetime support and 1 year product replacement service.
Delivery Info Prompt and secure shipping across the 48 contiguous United States with tracking included. Shipped to your verified address only. Return Policy Returns are accepted within 30 days of delivery if you are not completely satisfied. Items must be returned in original condition and packaging. Payment Options We accept PayPal, credit cards, and all official payment methods supported by . response & Contact We appreciate your positive review! For any questions, please contact us anytime via messages.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|