CUSTOM MAILBOX NUMBER DECALS – SET OF 2
Give your mailbox a clean, personalized appearance with custom-made vinyl number decals. Each decal is precision cut from premium outdoor vinyl and made to order using the numbers you provide.
WHAT YOU WILL RECEIVE
For each quantity of 1 ordered, you will receive:
• 2 identical mailbox number decals up to 6 digits maximum
• One decal for each side of your mailbox
• Transfer tape already applied for easy installation
Example: Ordering a quantity of 1 gives you 2 decals. Ordering a quantity of 2 gives you 4 decals.
DECAL SIZE
The size selected from the available options represents the approximate vertical height of the numbers.
The overall length will vary depending on:
• The number of digits requested
• The selected number height
• The font and spacing
These decals are supplied together as a complete number so the digits remain properly spaced and aligned during installation.
DIE-CUT DECALS – NO BACKGROUND
These are single-color, die-cut vinyl decals. They are not printed stickers and do not include a clear, white, or colored background.
Only the individual vinyl numbers remain after installation. The surface of your mailbox will show through around and between the enter the exact mailbox or address numbers you would like in the personalization box or order notes, your desired color and what font you want the numbers made in.
Carefully verify your numbers before submitting your order. Your decals will be custom made exactly as entered.
INSTALLATION INSTRUCTIONS
For best results, apply the decals to a smooth, clean, dry mailbox surface.
Clean the application area thoroughly with rubbing alcohol to remove dirt, grease, wax, and other residue.
Allow the surface to dry completely. Do not apply over wax, silicone, oil, or textured surfaces.
Before removing the backing paper, firmly rub over the entire decal with a squeegee or credit card. This helps the numbers adhere to the transfer tape.
Position the decal on the mailbox. You may use painter’s tape to hold it in place and confirm that it is straight.
Slowly peel away the backing paper, making sure all vinyl numbers remain attached to the transfer tape.
Carefully lower the decal onto the mailbox and firmly smooth it from the center outward to reduce air bubbles.
Rub firmly over each number, paying special attention to the edges.
Slowly remove the transfer tape by pulling it back parallel to the mailbox surface. Do not pull it straight outward.
If a number begins lifting with the transfer tape, lay the tape back down, rub the area again, and slowly continue peeling.
Apply in mild, dry weather whenever possible. Avoid washing or heavily handling the mailbox for at least 24 hours after installation so the adhesive can properly bond.
IMPORTANT
• Made to order with your custom numbers
• Set of 2 decals per quantity of 1
• Single-color die-cut vinyl
• No background
• Designed for smooth, clean mailbox surfaces
• Not recommended for heavily textured, rusty and or peeling mailboxes. The vinyl needs a clean smooth surface to bond to.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.