Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

SEM 69508 Rust Mort Rust Remover & Converter, 1 Pint

SEM 69508 Rust Mort Rust Remover & Converter, 1 Pint
$34.30

Buy Now

SEM 69508 Rust Mort Rust Remover & Converter, 1 Pint

Phosphoric acid · Ready to use · Brush or dip · Rinse with water after use · 1 pint

SEM 69508 Rust Mort is a ready-to-use phosphoric acid compound in a 1-pint bottle that removes minor surface rust down to bare metal or converts heavier rust to an insoluble black coating, applied by brushing or dipping in 3-4 coats and rinsed with water before body filler, primer, or top coat.

Features
  • Removes light rust and converts heavy rust into a stable, workable substrate
  • Creates an ideal surface for filler or primer, according to SEM
  • Ready to apply with no mixing or reducing
  • Requires minimal surface preparation
  • Apply by brushing or by dipping small parts
  • Leftover Rust Mort can be strained and returned to the container after use
Includes
  • 1 x SEM 69508 Rust Mort, 1-pint bottle
Specifications
  • Brand: SEM Products
  • Part Number: 69508
  • Product Type: Rust remover and converter
  • Active Ingredient: Phosphoric acid
  • Color: Green
  • Size: 1 pint bottle
  • Recommended Coats: 3-4
  • Mixing: Ready to use; do not dilute or reduce
  • VOC (actual, less exempts): 1.44 lb/gal (173 g/l)
  • Shelf Life: 3 years under normal storage conditions
Compatible Applications
  • Substrates: Rusted ferrous metal; designed for minor surface rust
  • Application Methods: Brushing; dipping (submerge part in a plastic container)
  • Follow-Up Products: Body filler, primer, or top coat, applied per the manufacturer's instructions
Application Notes
  • Must be rinsed off with water and a brush after treatment. Excess or unconverted Rust Mort left on the surface can cause top coats to lose adhesion.
  • Not designed for prolonged exposure. The treated area must be rinsed, dried completely, and top coated. Limit exposure after drying to prevent flash rust.
  • On minor surface rust, correct use removes all visible rust and leaves bare metal. Thicker rust may need multiple applications.
  • A black coating means the rust was converted but not fully removed. It can be top coated if no rust remains underneath.
  • A white coating means not enough Rust Mort was applied or kept wet. Sand the area and re-treat.
  • If any coating remains after rinsing and drying, sand a small test area to confirm no rust remains underneath, and check adhesion before top coating.
  • Keep Rust Mort off painted surfaces, because it may react with or discolor top coats or undercoats.
  • On parts to be sandblasted, use Rust Mort first, then sandblast. Using it after blasting can cause flash rust in adjacent areas.
Safety & Setup
  • Contains phosphoric acid. See the SDS for proper personal protective equipment.
  • Remove loose scale and excess rust before application.
  • Brushing: apply multiple coats, keeping the area wet with Rust Mort until all rust is converted or removed. The longer the surface stays wet, the better the result.
  • Dipping: submerge the part fully in Rust Mort in a plastic container, and soak until all rust is removed, checking regularly.
  • Before top coating, clean the surface with SEM Solve, XXX Universal Surface Cleaner, or another VOC-compliant solvent, and follow the top coat manufacturer's prep and abrasion requirements.
  • Neutralize any spills on concrete immediately with water to avoid etching and discoloring.
  • Store in a cool, dry, ventilated place away from heat, sparks, and flames.

This item is also often referred to as SEM Rust Mort, SEM phosphoric acid rust converter, rust mort pint, SEM green rust remover, or SEM 69508.

About SEM Products

SEM Products, Inc., based in Rock Hill, South Carolina, makes refinishing, repair, and corrosion protection products for the automotive, commercial, marine, and aerospace markets, including primers, adhesives, coatings, and rust treatments.

Frequently Asked QuestionsDoes SEM 69508 Rust Mort remove rust or convert it?

Both. SEM 69508 Rust Mort removes minor surface rust and, used correctly, leaves bare metal. On heavier rust, it converts the rust into an insoluble black coating that can be top coated as long as no rust remains underneath.

Do I need to rinse SEM 69508 Rust Mort off?

Yes. After treatment, rinse SEM 69508 Rust Mort off with water and a brush, then dry the surface completely. Excess Rust Mort left on the surface can cause body filler, primer, or top coats to lose adhesion.

How many coats of SEM 69508 Rust Mort do I need?

SEM recommends 3-4 coats of SEM 69508 Rust Mort, keeping the surface wet until all rust is converted or removed. Thicker rust may need additional applications.

What does a white coating mean after using SEM 69508 Rust Mort?

A white coating after rinsing means not enough SEM 69508 Rust Mort was applied or kept wet to treat the rust. Sand the area and re-treat it with Rust Mort until the rust is fully removed or converted.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design