Product highlights
100 watts per channel into 8 ohms (frequency bandwidth not given) at 0.1% THD with 2 channels driven125 watts x 2 into 4 ohms225 watts bridged into 8 ohmsrobust protection circuitrycombines easily with other Russound 1/2-rack productsselectable output impedance: 8-ohm, 4-ohm, or bridged12v trigger input and output for automated turn-onsignal-sensing input activates the amplifier when a source is detected1 pair of analog stereo RCA inputsone pair of speaker connectors (supports up to 12-gauge wire)space-saving low-profile designtotal harmonic distortion: less than 0.1% into 8 ohmsrack-mountable with included hardwaredetachable power cable8-1/2"W x 10-1/2"D x 1-3/4"Hweight: 4.1 lbs.warranty: 3 yearsWhat's in the box
- Digital stereo amplifier
- 6' AC power cord
- 2 Short brackets
- Long bracket
- Mounting plate
- 4 Countersunk-head machine screws
- 6 Pan-head machine screws
- 4 Rubber feet
- Cord-lock clip
- Installation Manual
About this item
Written by Crutchfield's Kramer Crane
Powerful amp, small footprint
I've been a fan of Russound's stereo amplifiers for years. They produce lots of power and are easy to use, and the A2100 is no exception. This compact workhorse delivers 100 watts per channel while only taking up half the space of a traditional rack-mounted amp. Install two side-by-side, or use the included full-width mounting ears for a clean single-amp install.
Perfect for music in a second zone
With plenty of power under the hood, the A2100 can be used in a variety of configurations. Drive your main speakers with it, or connect a pair of outdoor or kitchen speakers for easy sound in a second zone.
Want to really jam? Bridge a pair of these amps to drive even the most power-hungry speakers with ease.A pair of RCA inputs support a pre-amp, receiver, or analog sources that have their own volume control.
Multiple power-on options
The A2100 can be turned on manually, or automatically when it detects a source. It's even 12-volt trigger compatible so you can have it turn on when another piece of equipment is fired up.A carefully designed chassis minimizes heat when installed in a rack.
Never worry about blowing your speakers
One of the features I like most about the A2100 is the ability to set maximum volume limits. On the back panel is a dial that lets you set a volume "ceiling." Even if an over-enthusiastic listener maxes out the system's volume, there won't be any damage to the speakers. This is a great way to make sure that guests or kids don't accidentally turn the system up to distortion levels.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.