Router Track Adapter for DeWalt DCW600B / DCW600 Series Trim Router and DeWalt
- STRAIGHT ROUTING CONTROL — A groove that wanders off your layout line turns a cabinet job into extra work; this adapter connects your trim router to your guide track so it follows a straight path across the workpiece. Use track-guided movement instead of steering freehand when cutting grooves or routing straight edges for furniture, cabinet panels, and woodworking projects on your bench.
- PALM GRIP CONTROL — Keep your hand on an ergonomic palm grip as you move through a straight cut, with a bolt-on connection that presses the handle against the base for added strength. The handle and base plate holes take an M5x65mm Hex or Cap head bolt; you get the plastic part only, and the bolt and any other hardware your setup calls for are not included and must be purchased separately.
- CLEAR BIT ALIGNMENT — Line up your next pass without searching around the sides of the adapter: bit centerline marks extend across the top, where they are easier to see as you position your cut. The tear-drop-shaped opening gives your router bit its passage through the base, bringing visible alignment marks and bit access together when you move from your pencil layout to routing a groove.
- REINFORCED WORKING AREAS — Keep the connection between your cutting tool and guide supported during furniture and cabinet work, with a thickened section after the track attachment that counters flex. Fillets along the edges running across the adapter reduce stress concentrations and add strength, giving this working area extra support as you advance along the board during a guided pass.
- COMPACT WORKSHOP STORAGE — Clear your bench for assembly after the routing is done: the compact adapter stores alongside your other workshop accessories instead of staying out across your work area. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).
A freehand pass is a frustrating place to lose the line you marked on a cabinet panel. When your project calls for a straight groove or edge, give your trim router a track to follow instead of steering the whole cut by hand.
The SplashNColor router track adapter connects your trim router to your guide track for straight routing across a workpiece. It turns your existing routing setup into a track-guided way to cut grooves and work along straight edges on furniture parts and cabinet projects. The compact plastic part stores with your workshop accessories when the cutting is finished.
Your hand rests on an ergonomic palm grip that bolts to the base. That attachment puts the handle in compression against the base for a strong connection as you move the adapter along the track. The handle and base plate holes are sized for an M5x65mm Hex or Cap head bolt.
Before you start a pass, use the bit centerline marks extending across the top to line up your cut. Their position makes them easier to see while you align the router, and the tear-drop-shaped opening gives the bit a path through the adapter. Filleted edges reduce stress concentrations and add strength across the body, while the thickened section after the track attachment supports an area prone to flex.
For woodworkers, hobbyists, and DIY users, this is a way to put guide-track control to work in a home workshop or woodworking shop. Move from marking a furniture component to routing its groove, then put the compact adapter away before assembly.
HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.