Router Guide Rail Adapter Compatible with Dewalt Trim Router, Black

• FOLLOW A STRAIGHT PATH — When a straight groove calls for more control than a freehand pass, give your trim router a path to follow. This adapter connects your trim router to your guide rail so the rail guides its travel along the workpiece, letting you concentrate on moving through the cut rather than steering the entire route by hand at your workshop bench.
• REUSE YOUR BASE MOUNT — This plastic part attaches at your trim router\'s existing base plate fastening point, so you use the original mounting connection rather than add extra mounting hardware to bring your router and rail together for a guided cut. Mount it using your trim router\'s original base plate screw, which you supply and which is not included.
• LESS UNWANTED MOVEMENT — An adapter with excess movement gives you more to manage while your trim router travels along the rail; this one keeps movement between your router and guide rail to a minimum. That closer connection puts the focus on the cut as you advance along your workpiece, with the rail guiding the route and less unwanted motion to manage between your hands and the board.
• LOWER ROUTING PROFILE — Keep your trim router\'s rail connection low rather than building unnecessary height into your setup. The adapter\'s low-profile design maintains a low center of gravity for more controlled routing, giving you a lower arrangement to work with as you move along a board at your workshop bench and carry out guided cuts on the wood projects taking shape in your shop.
• SHAPE YOUR BOARD EDGES — Bring rail-guided control to edge profiling when your project calls for shaping the side of a workpiece, not just cutting a groove across its surface. Use your trim router with the adapter and guide rail to follow the edge of your board at the bench, keeping a guided approach to the pass while you work on the details that give your wood project its finished outline. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).

Freehand routing leaves you steering the entire path while you make the cut. When your project calls for a straight groove or a shaped edge, you want a guide to follow instead of managing the direction entirely by hand.

The SplashNColor router guide rail adapter connects your trim router to your guide rail so the rail guides its travel along the workpiece. It brings a controlled path to straight grooves and edge profiling at your workshop bench. With your router connected to the rail, you follow a guided route along the board rather than direct the entire pass freehand.

Mount the plastic part using your trim router\'s original base plate screw. It uses the existing base plate fastening point rather than requiring additional mounting hardware, so your router\'s original connection does the job. The adapter keeps movement between your router and rail to a minimum during guided routing, limiting unwanted motion as you advance through the cut. Its low-profile design also maintains a low center of gravity, keeping the arrangement low for more controlled passes.

For woodworkers and makers working on wood projects in the workshop, this adapter puts the guide rail to work with your trim router. Use it when cutting straight grooves in a workpiece or shaping a board\'s edge, bringing rail-guided travel to both jobs. Whether your next task is a groove along a board or an edge that needs profiling, the connection gives your router a path to follow. Your bench setup stays centered on the work: your trim router, your guide rail, and an adapter that brings them together for controlled routing.

HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.