I used this once and got done what I needed. I’m also including the woodpecker tools (ultra shear) juice groove bit that’s $37 new
Product Details
To prevent juices from dripping off the edge of your cutting board, a smoothly routed groove around the edge is essential. Our Juice Groove Routing Jig makes the process of routing the grooves easy, accurate and adjustable. The jig adjusts to accommodate cutting boards up to 18'' x 18'' in size, and includes attachments to create corner radii and to rout channels around square, round or triangular through-handle openings. Use the jig with our optional Rounded-Shoulder Juice Groove Router Bits, available in two groove widths: 3/8" and 1/2", big enough for even the juiciest watermelon, but not so big that the grooves are distracting or detract from usable space.
Juice Groove Router Jig Details:
Adjusts in both directions to simplify the process of routing a uniform juice groove on cutting boards up to 18'' x 18'' in size
Rides against rails and corner guides to rout a groove centered 1'' in from the edges
Use with cutting boards from 3/4'' to 1-1/4'' thick; thicker boards require spacers under the jig, while thinner boards require a spacer under the board
Guide bushing mounts to any plunge router baseplate with a 1-1/4'' diameter center hole
Clamping brackets mount to the outside of the rails so jig can be clamped to the work surface or attached to a substrate with #8 screws
Clamping brackets attach in two orientations—one for cutting boards from 3/4'' to 1'' thick and another for boards from 1'' to 1-1/4'' thick
Corner radius guides produce a curve at the corners with a 1/2'' radius on the inside edge
I removed the shipping label from the box and it tore off the graphics printed on the box
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.