Product highlights
dual amplifier wiring kitoxygen-free copper wires meet or exceed the American Wire Gauge specifications and requirements17 feet of 1/0-gauge power cable3 feet of 1/0-gauge ground cable4 feet of 4-gauge power cable4 feet of 4-gauge ground cabletwo 1/0-gauge to 4-gauge distribution blocks20 feet of 18-gauge turn-on lead wirethree 16-foot twisted pair RCA patch cables30 feet of 16-gauge speaker wireANL/MAXI fuse holder and 300-amp fuseassortment of wire termination hardware and cable tieswarranty: 1 yearWhat\'s in the box
- 17\' Power cable (1/0-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
- 300A MAXI fuse (installed in fuse holder)
- 3\' Ground cable (1/0-gauge) in a gray translucent jacket (with a ring terminal on one end)
- 4\' Power cable (4-gauge) in a red translucent jacket
- 4\' Ground cable (4-gauge) in a gray translucent jacket
- 2 Distribution blocks (One 1/0-gauge in/two 4-gauge out)
- Three 16\' twisted pair RCA patch cords
- 30\' Length of 16-AWG speaker wire
- 20\' Length of turn-on lead in a blue jacket
- Ten 4\" wire ties
- Plastic bag containing the following:
- Crimp-on ring terminal for 1/0-gauge wire
- Large black rubber boot
- Plastic 1/0 gauge-sized grommet
- 2 Red plastic butt connectors
- Crimp-on female 0.25\" quick slide connector
- Crimp-on spade connector
- Red rubber boot
- GM battery post bolt with 2 nuts/2 lock-washers/3 star-washers installed
- 2 Rubber washers
- Decal with model and serial numbers
About this item
Written by Crutchfield\'s Buck Pomerantz
All-in-one wiring kit for your dual-amp system
Rockford Fosgate\'s RFK1D dual amp wiring kit supplies everything you\'ll need to send power and signal to two amps and your speakers. It\'s designed for amplifier systems with fuse ratings totaling up to 300 amperes.
- For Class AB amp systems — 1,000 to 1,700 total watts RMS
- For Class D amp systems — 1,700 to 2,700 total watts RMS
Pure copper is the best
Rockford Fosgate wire is made of oxygen-free copper, with no impurities that could raise its resistance to a signal\'s flow or add interference, and meets or exceeds American Wire Gauge (AWG) requirements.
Power and signal distribution
Along with the hefty 1/0-gauge power and ground cables you\'ll find two distribution blocks for the main power and ground, smaller 4-gauge power and ground cables for the amps, 30 feet of speaker wire, three 2-channel RCA patch cables, a fuse holder with a 300-amp fuse, and more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.