Robotics Lot Arduino Sensor Shield ESP32-2432S028 Servo Driver 20 Metal Servos
$129.99

ROBOTICS / QUADRUPED BUILDER LOT - ARDUINO, ESP32 DISPLAY, SERVO DRIVER, 20 SERVOS, 18650 UPS
Everything in this lot has been tested and is working. It\'s a good starting point for a quadruped, hexapod, robot arm or other servo-heavy build.
WHAT\'S INCLUDED
Controllers and boards:- 1x Arduino board with Sensor Shield V5.0 installed (screw terminal for external servo power)- 1x Waveshare Pico Servo Driver board (4.5-26V input, power switch, 16 servo headers)- 1x ESP32-2432S028 2.8 inch touchscreen display board (ESP32-WROOM, micro SD slot, USB-C and micro USB, onboard RGB LED)- 1x DIY More dual 18650 UPS / battery board (USB-C, 5V and 3V outputs)
Servos (20 total):- 12x SunFounder Metal Gear servos, model SF006M- 4x 25kg HV digital servos, 180 degree- 4x 25kg digital servos, 360 degree- 1x red aluminum 25T servo horn mounted on one of the HV servos
CONDITIONUsed and tested. All items power up and work as they should. The servos and boards show normal cosmetic wear from bench use, including some paint, glue and tape residue on a few servo bodies, and the ESP32 display has a hand-made decorative bezel. Please look closely at the photos, as what you see is what you get.
NOT INCLUDED- 18650 batteries- Raspberry Pi Pico (the servo driver board is sold without one)- Power supply, cables or mounting hardware, other than the servo leads attached to the servos
Sold as one lot. Feel free to message me with questions before buying.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.