This bridge works very well with Ring wired floodlights, but many of the negative reviews appear to come from incomplete or incorrect setup. If you’re upgrading from the 1st-generation Ring Bridge, there are mandatory steps that must be followed or the system will not function correctly.
Required steps when converting from 1st-gen to newest-gen bridge:
Delete the 1st-generation Ring Bridge from the Ring app first.
Do this before touching the lights. The app will not transition devices correctly if the old bridge still exists.
Delete each wired floodlight from the Ring app and re-add it as a new device.
This is not optional.
During re-setup, select Amazon Sidewalk as the connection type.
This forces the required firmware update for compatibility with the newer bridge.
If these steps are skipped, the lights may appear online but will not behave correctly, leading to the “doesn’t work” complaints seen in reviews.
Helpful tip: before removing a floodlight from the app, screenshot the device ID from its settings page. You can use that ID during re-setup and avoid taking the fixture down or climbing a ladder to scan the QR code.
Another improvement over the 1st-gen bridge: you can use more than one bridge at the same address to extend coverage. This was not possible with the original model and makes a big difference on larger properties.
Once properly migrated, the system has been stable, responsive, and significantly more reliable than the original bridge. This is solid hardware — but it expects you to follow the process exactly.
One last note: the built-in night light can be turned off in the Ring app
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.