Right Angle Labeling Machine 90 Degree Corner Label Applicator for Box Corner

110V Right Angle Labeling Machine 90 Degree Corner Label Applicator for Box Corner

The right angle labeling machine is specifically designed for the unique labeling requirements of objects with right-angle edges, such as packaging boxes. Its core feature is a mechanical structure capable of precisely folding labels, securely wrapping the sides or sealing edges of standard flat labels to form neat right-angle corners or complete seals. Utilizing a stepper motor as its drive core, it supports continuous 24-hour operation without overheating damage, maintaining precise and stable label positioning even during prolonged use.

This equipment achieves high-precision, high-efficiency corner-folding labeling and sealing that is difficult to accomplish manually, effectively enhancing packaging aesthetics and sealing integrity. It specializes in right-angle labeling, 90-degree corner labeling, and angled corner labeling on box sides to provide tamper-evident sealing. It is applied for tamper-evident labeling on packaging boxes for cosmetics, electronics, pharmaceuticals, and similar products. Widely used across printing, food, daily chemicals, electronics and other industries.

Model No.: TB10Input Voltage: AC110V / 60HzLabel Thickness: ≥ 0.002\" (0.05 mm)Rated Power: 400WLabeling Speed: 0–60 pcs/minApplicable Label Size:0.59-1.96\" (15-50mm)Applicable Label Roll: Outer Diameter: 7.87\" (200mm)Inner Diameter: 2.95\" (75mm)Gap Between Two Labels:>0.07\" (2mm)Label Diameter:<1.18\" (30mm)Labeling Accuracy: ±0.02\" (0.5mm)Ambient Temperature: 41℉ - 95℉ (5℃ - 35℃)Ambient Humidity: < 85% R.H. (at 77℉ / 25℃)Machine Body Material: Stainless SteelPrecautions 1. Do not use the machine in a humid environment.

2. The machine is grounded internally, please use single-phase three-wire power cord, the user\'s power grid must have a reliable grounding device, otherwise the static electricity cannot be discharged, the human body will become a conductor of static electricity discharged, and thus you will have a sense of discomfort of being electrocuted.

3. If the system is not properly grounded, it may cause electric shock.

4. Do not open the protective or access covers. Only authorized manufacturer or authorized dealer service personnel should open them.

5. Avoid contact of fingers, hair, clothing and jewelry with traction wheels during operation or feeding of materials to avoid entanglement. PLC Micro-Computer Controller

PLC Micro-Computer Controller: The multi-function PLC system offers flexible configuration to meet diverse operational needs, featuring switchable Chinese and English language interfaces. Its program is driven by high-performance chips, enabling real-time monitoring of multiple data parameters. With a robust and durable circuit board design, the system ensures reliable performance, while user-friendly one-touch screen operation significantly enhances workflow convenience.

Adjustable Work Table

The labeling machine is equipped with an adjustable worktable that can be flexibly adapted to packaging boxes of various sizes. Its design is compatible with circular labels ranging from 15 mm to 50 mm in diameter, demonstrating the device\'s fundamental adaptability to both box dimensions and label specifications.

High-quality Stainless Steel Countertop

The equipment features a high-grade stainless steel work surface, which offers excellent wear and scratch resistance. The material itself is rust-proof and corrosion-resistant, ensuring it maintains a smooth and new-like appearance and texture even after prolonged use.

Installation and Use

1. Remove the machine from the box, place it on a flat surface, and then turn on the power switch.

2. Loosen the fixing screws of the reels with an Allen wrench and take out one of the outer reels.

3. Load the appropriate discharge reel cores.

4. Open the top cover of the machine and fix it with the fixing screws so that the top cover can be in the open state to facilitate the labeling operation.

5. Check that the label compression bit is located 8-10mm above the crease and does not interfere with the top cover roller.

6. Check the red induction point, the center point of the coil and the center of the waste material in a straight line. If they are not in a straight line, you can adjust the left and right position of the material plate to adjust the position.

7. Load the outside of the material tray (to ensure that the material roll can rotate smoothly, the material roll cannot be jammed or blocked) and then tighten the screws to fix it.

8. Tighten the screws on both sides, (tightening standards are slightly tightened, do not need too much force, so that the pressure balance of the rubber roller is kept.)

9. Check whether the height of the peeling knife is pressed in the position of a quarter of the label, if not in this position, you can adjust the screen in the \"length\" parameter to adjust the length of the parameter, the larger the parameter is, the label\'s position is more up.

10. Light up the screen, select the language and press the start switch to start the job.

You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

On Aug 6, 2026 at 02:08:01 PDT, seller added the following information:

On Aug 17, 2026 at 19:07:11 PDT, seller added the following information: