Replacement Handheld Remote Control for Hunter Ceiling Fans — K6266-02
Color: Black
Direct replacement for remote numbers: K6266-01, K6266-02, K6266-06, K6266-07, K6266-12, and K6266-13.
Compatibility
Battery and Included Items
Requires one CR2025 or CR2032 battery (included).
Wall mounting bracket is not included.
Wireless receiver is not included. Your fan must already have a compatible receiver.
Pairing Instructions
The remote must be paired with your fan before it can control the fan or light.
Remove the blue insulating tab from the battery compartment.
Switch off the circuit breaker supplying power to the fan. Wait 1 minute, then switch it back on.
Within 3 minutes of restoring power, press and hold the Light button and Up Arrow button together to pair the remote.
The fan’s light will flash to confirm successful pairing.
If the light does not flash, switch the power off again, wait 1 minute, restore power, and repeat the pairing process.
To control multiple compatible fans with one remote, repeat the pairing process for each fan. If your compatible fan has a pull chain, set the fan’s pull-chain speed control to High.
Operating Instructions
Keep the fan’s wall switch ON so the receiver has power.
Fan button: Press and release to turn the fan on or off.
Up Arrow: Press and release to increase fan speed.
Down Arrow: Press and release to decrease fan speed.
Light button: Press and release to turn the light on or off.
Adjust brightness: With dimming enabled, press and hold the Light button. Release when the desired brightness is reached.
Enable or Disable Light Dimming
For compatible Hunter 5-series fans, press and hold the Up and Down Arrow buttons together for 5 seconds, then release. This switches dimming mode on or off. Once enabled, hold the Light button to adjust brightness.
Dimming requires a compatible dimmable light kit and dimmable bulbs. Disable dimming when using non-dimmable bulbs.
Button Press Tips
Use a single press and release for everyday fan on/off, light on/off, and speed adjustments. Use a long press for brightness adjustment and the button combinations described above.
Additional functions, including fan reversal or special double-press commands, depend on the fan and receiver model. Please consult your fan’s original manual for those the remote responds intermittently or does not work:
Confirm the blue battery tab has been removed and the battery is installed correctly.
Confirm the fan has power and its wall switch is ON.
Try a fresh CR2025 or CR2032 battery and test the remote near the fan.
Repeat the pairing process above if necessary.
For compatible pull-chain fans, confirm the fan speed is set to High.
Need help? Please contact us through with your fan model number, original remote part number, and a description of the issue.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.