Renishaw PHC10-2 Probe Head Controller CMM Motorized Probe Head Control Unit

Renishaw PHC10-2 Probe Head Controller (Controller Only)BrandRenishawModelPHC10-2 (front panel)TypeProbe head controller for motorized CMM headsCountry of OriginUnited Kingdom (MADE IN UK on rear plate)IncludedController and power cord onlyConditionUsed; powers on, red ERROR/DATUM LED lit with no head attachedApplications

• CMM repair: replacement PHC10-2 controller for a CMM that runs a Renishaw PH10-series motorized head
• Spare on the shelf: a backup controller to cut downtime when a unit fails
• Retrofit projects: controller for builders who already have the head, interface and hand control
• Service and test benches: bench controller for checking PH10-series heads

Why Renishaw?

Renishaw is a UK metrology company known for CMM probe heads and control electronics. The PHC10-2 is the controller that drives a Renishaw PH10-series motorized probe head and talks to the CMM over RS232. This listing is for the controller only. The head, interface and hand control are sold separately and are not panel: RENISHAW PROBE HEAD CONTROLLER PHC10-2 (IMG_1352, Hero)

Front LEDs: POWER ON and ERROR (DATUM) (IMG_1351)

Rear connectors: HCU, RS232, PICS OUT, HEAD, OUTPUT (IMG_1357)

Rear switches: DIP switch banks marked 1-10, 11-14 and 15-18 (IMG_1357)

Rear plate: MADE IN UK; FCC part 15 statement; THIS APPARATUS MUST BE EARTHED; REPLACE FUSE ONLY WITH TYPE 2A (T) HBC (IMG_1358). Please read the input rating from IMG_1358 yourself

Power cord: included (IMG_1364, IMG_1365)

Physical SKU: 4484 sticker on the unit (IMG_1353, IMG_1362, IMG_1363)

Condition & Testing

This is a used benchtop controller with light scuffs and smudges on the panels and case from normal handling. Please look at the photos for the exact cosmetic condition.

Testing: We applied power for the photos. The green POWER ON LED lights. The red ERROR / DATUM LED is also lit. No probe head, interface or hand control was connected, so we cannot say whether the error clears with a head attached. We did not test head control, RS232 communication or outputs. No calibration certificate is included.

Backed by our 30-day return guarantee.

What\'s Included

• One Renishaw PHC10-2 probe head controller, as pictured
• AC power cord (as pictured)
• Physical SKU 4484 sticker

Not included: PH10-series probe head, PI 200 interface, HCU1 hand control, RS232 or head cables, software, manuals, calibration certificate, original carton. This is the controller only.

If an accessory is not pictured or mentioned, it is not included.

Shipping

Free standard parcel shipping within the contiguous United States (lower 48). 1 business-day handling. This item ships as a parcel, not freight. International Shipping may be available through ’s program where the item qualifies.

Returns

30-day return guarantee. Buy with confidence — if it isn’t right, send it back and we cover the return shipping.

Best Offer Enabled

We welcome reasonable offers. Send us your best!

Questions? Message us anytime — we usually reply within a few hours. Thanks for looking!

nemesisentpdx | Portland, Oregon

Physical SKU: 4484