Raymarine EV-100 Power Evolution AutopilotEV-100 Power Evolution AutopilotFeatures:A complete autopilot-in-a-boxType 0.5 Hydraulic Pump includedEvolution Ai for superior performanceNo calibration requiredIdeal for small, hydraulically steered powerboatsBuilt-in trolling patternsFor 12V DC power systemsIncludes p70Rs Autopilot ControllerIncludes:EV-1 Sensor Corep70Rs Autopilot Control HeadACU-100 Actuator Control UnitType 0.5 Hydraulic Pump 12VEvolution Cabling KitEV Unit O-Ring Pack (set of 2)Wall Mounting BracketThe EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features:Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics changeFlexible installation optionsMount above or below deckSimple SeaTalkng connectivity to the control head and ACUSolid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditionsFast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displaysP70Rs Autopilot Control HeadThe p70RS has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter.Features:LightHouse user interface is simple and quick to useWide 160° viewing anglesStart up wizard helps you configure the pilot quickly and easilyAnti-reflective coating for improved visibility in bright sunlightLow power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightnessSupported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog SteerSimple system and group dimming/illuminationSupport for multiple data sourcesSeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)ACU-100 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Support Drive UnitsType 0.5 Hydraulic Pump included-3.1\" to 6.7\" cu in ramEvolution Cabling Kit1 x SeaTalkng Power Cable (0.4m)1 x SeaTalkng Backbone Cable (5m)1 x SeaTalkng Spur Cable (0.4m)1 x SeaTalkng 5-way Connector Block2 x SeaTalkng T-piece Connector2 x SeaTalkng Terminator
EV-100 Power Evolution Autopilot
Features:
- A complete autopilot-in-a-box
- Type 0.5 Hydraulic Pump included
- Evolution Ai for superior performance
- No calibration required
- Ideal for small, hydraulically steered powerboats
- Built-in trolling patterns
- For 12V DC power systems
- Includes p70Rs Autopilot Sensor Core
- p70Rs Autopilot Control Head
- ACU-100 Actuator Control Unit
- Type 0.5 Hydraulic Pump 12V
- Evolution Cabling Kit
- EV Unit O-Ring Pack (set of 2)
- Wall Mounting Bracket
The EV Sensor Core
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation optionsMount above or below deckSimple SeaTalkng connectivity to the control head and ACUSolid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditionsFast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displaysP70Rs Autopilot Control Head
The p70RS has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or user interface is simple and quick to use
Wide 160° viewing anglesStart up wizard helps you configure the pilot quickly and easilyAnti-reflective coating for improved visibility in bright sunlightLow power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightnessSupported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog SteerSimple system and group dimming/illuminationSupport for multiple data sourcesSeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)ACU-100 Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.
Support Drive Units
Type 0.5 Hydraulic Pump included-3.1\" to 6.7\" cu in ram
Evolution Cabling Kit
- 1 x SeaTalkng Power Cable (0.4m)
- 1 x SeaTalkng Backbone Cable (5m)
- 1 x SeaTalkng Spur Cable (0.4m)
- 1 x SeaTalkng 5-way Connector Block
- 2 x SeaTalkng T-piece Connector
- 2 x SeaTalkng Terminator
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.