Energy‑Compensated Radiation Survey Meter
The Radiation Alert® Monitor 4EC is an ergonomic, energy‑compensated radiation survey meter designed for accurate and reliable radiation monitoring across a wide range of applications. It detects alpha, beta, gamma, and X‑ray radiation over three selectable measurement ranges, providing versatile coverage for general radiation surveys and safety inspections.
Energy‑Compensated, Linear Gamma Response
The Monitor 4EC offers a linear response for gamma and X‑ray radiation above 40 keV, ensuring dependable dose‑rate measurements across varying energy levels. Its energy‑compensated design improves accuracy when monitoring gamma and X‑ray sources, making it suitable for professional radiation safety and compliance use.
Simple, Ergonomic Operation
Built for ease of use, the Monitor 4EC features an ergonomic design with clear, intuitive response. A red count indicator light flashes and an audible beep sounds with each detected event, providing immediate visual and audible confirmation of radiation levels during surveys.
Applications & Uses
Checking accelerator & x-ray shielding for leakage, Checking industrial gauges, such as moisture, density, or level gauges containing Cesium-137, Locating sources, Personal protection, General surveying
SpecificationsDetector
Halogen-quenched GM tube, energy compensated sidewall 2mm thin filter. Thin mica window 1.5-2.0 mg/cm2 thick. Effective diameter of window is 9.1 mm (.36 in.).
Operating Range
0-.5, 0-5, 0-50 mR/hr 0-500, 0-5,000, 0-50,000 CPM
or 0-5, 0-50, 0-500 μSv/hr (SI Scale Meter Option)
Energy Sensitivity
1000 CPM/mR/hr (Cs137). Detects alpha down to 2.5 MeV; typical detection efficiency at 3.6 MeV is greater than 80%. Detects beta at 50 keV with typical 35% detection efficiency and beta at 150 keV with typical 75% detection efficiency. Detects gamma and x-rays down to 10 keV typical through the window (non-compensated), 40 keV through the sidewall.
Accuracy
Reference to Cs137
Typically ±15% from factory, ±10% with NIST Source Calibration NIST Calibration Additional
Range Switch
X1, X10, X100, Battery Check.
Display
Analog Meter holds full scale in fields as high as 100X maximum reading. CPM & mR/hr scale. Optional SI Scale Meter Available
Audio Indicator
Internally mounted beeper (can be turned off for silent operation).
Outputs
3.5 mm jack with pulse out.
Power Requirements
9-volt alkaline battery (included). Approx. 2,000 hrs. at normal background
Temperature Range
-10° to +50°C (14° to 122°F)
Humidity
10% to 70% Non-Condensing.
Weight
231.33 g (8.16 oz)
Size
209 x 71 x 50 mm (8.2 x 2.8 x 1.9 in.)
Includes
Carrying Case w/ Belt Clip
Options
SI Meter Option
Limited Warranty
1 year limited warranty
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.