|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Radial USB-Pro Stereo USB Laptop DI 24-Bit Digital Audio Converter
$245.12

The Radial USB-Pro is a high-resolution stereo digital audio converter (DAC) and direct box that is designed to connect to any computer system to seamlessly transfer digital audio to analog. A stereo pair of balanced XLR audio outputs with adjustable level control then feeds the signal to a microphone preamplifier, PA system, mixing console or even a powered speaker! Made for plug and play simplicity, the USB-Pro will automatically be listed as an available sound card in the audio settings in all popular operating systems including Windows XP, Windows 7/8/10, and Mac OSX. Connection to a computer is accomplished through a standard USB type-B port. Digital-to-analog conversion can be monitored on headphones through the 3.5mm analog output to check signal quality and level before connecting to a sound system. A mono-sum switch may be engaged to check for phasing or for connection to a mono system. Should hum or buzz caused by ground loops be encountered, two recessed side-access switches allow the user to insert isolation transformers into the signal path. To further reduce susceptibility to noise, this is augmented with a ground lift switch that lifts pin-1 on both XLR jacks. As with all Radial products, the USB-Pro is designed to handle the rigors of professional touring. Our unique book-end design creates protective zones around the switches, connectors and controls to keep them out of harm\'s way. Inside, our time-tested I-beam construction assures the sensitive internal PC board will not torque, which could cause premature part failure. Finally, a full bottom no-slip pad provides mechanical isolation and electrical insulation to ensure quiet performance 24bit digital audio converter Ready to use without the need of a driver3.5mm analog headphone output to check signalBalanced Lo-Z outputs with switchable isolationAudio circuit type : Custom decoder with analog line driveUSB compliance : USB 1.1 full speedBit depth : 24bit (16bit capable)Sampling rate : 44.1kHz / 48kHz / 96kHz auto sensingSound file compatibility : WDM, MME, CoreAudio, DirectSound, WASAPI and .WAVSoftware compatibility : Windows XP/Vista/Win7/Win8/Win10 and Mac OSFrequency response : 5Hz ~ 40kHz (30Hz ~ 18kHz with isolation)Dynamic range : >90dBNoise floor : -90dBMaximum gain : +8dBuTotal harmonic distortion : 0.01%Stereo separation : 75dBuOutput impedance : 250Ω nominalDigital input : USB connector B-typeAnalog output : Stereo balanced mic level (2 x XLR-M)Headphone output : 3.5mm TRSLevel control : Variable, works on headphone and XLR outputsIsolation : Switchable for each channelMono switch : Sums left & right inputs to monoGround lift : Lifts pin-1 on both XLR : USB bus powered 500mA maximumFinish : Durable powder coatSize : 3.3\" x 5.0\" x 2\" (84 x 127 x 48mm)FCC approval : Complies with section 15 of the FCC RulesConditions : For use in dry locations only between 5°C and 40°C

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|