ProAudioStar
- DJ GEAR
- INSTRUMENT GEAR
- LIVE SOUND
- RECORDING
- MICROPHONES
- HEADPHONES
- ACCESSORIES
- SOFTWARE
- LIGHTING
- BUNDLES
Authorized Dealer Radial StageBug SB-6 Stereo Signal Isolator Stereo Signal Isolator - Open Box -
Description
Passive Stereo Line Isolator
The StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.
Problem solver for stereo systems
The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it\'s easy to insert into any system to remove noise quickly.
StageBug SB-6 Applications
Using the SB-6 in a stereo setup
Isolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼\" mono or TRS connectors may be used.
Using the SB-6 in a pro setup
When running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.
Using the SB-6 in a guitar rig
Eliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.
The SB-6 is a passive isolator that has been designed to work with both balanced and unbalanced signals. As detailed in the graphs below, the SB-6 is exceptionally linear throughout the audio range and exhibits nearly flawless phase shift even in the lower registers. Very low distortion from -40dB to +10dB makes the SB-6 ideally suited for instruments, consumer audio devices and pro-balanced audio signals, while the compact size makes it easy to integrate in just about any situation.
Features/Specs
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
- Audio circuit type : Passive Transformers
- Transformer : Eclipse Custom
- Frequency response : 20Hz-20KHz +/-1db
- Dynamic range : >140db
- Gain : -2dB
- Total harmonic distortion : <0.0008% @ 1kHz
- Phase Deviation : >5° @ 30Hz
- Input Impedance : Varies with Load/47K
- Output Impedance : 600Ω
- Maximum Input : >+25dBu
- Input pad, 180° polarity reverse, Ground lift
- Input Connectors : 1/4\" TRS
- Output Connectors : 1/4\" : 14 gauge steel chassis & outer shell
- Size (L x W x D) : 3.92\" x 2.54\" x 1.7\" (100mm x 65mm x 43mm)
- Power : Passive, no power required
- Conditions : For use in dry locations only between 5°C and 40°C
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.