|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Radial Engineering ProAV1 Multi-Media DI Direct Box
$149.99

BRAND NEW FROM A FACTORY AUTHORIZED RADIAL ENGINEERING DEALER!
From Radial Engineering:
Passive Multimedia Direct Box The ProAV1 is a passive direct box with multiple input connector types and a stereo-to-mono merge function designed specifically for AV integrators to reduce channel requirements. - Versatile direct box for multimedia applications
- Easy to use, ultra-quiet passive design
- Transformer isolation eliminates hum and buzz
- Handles huge transients without distortion
A necessity for your audio toolkit The ProAV1 provides you with the ability to connect almost any audio source to a PA system, while automatically summing stereo sources to mono to preserve channels and simplify the audio setup. Inputs are available via 1/4\", RCA, 3.5mm stereo, and line-level XLR connections, giving you the ability to easily connect to smartphones, tablets, laptops, CD players, or even a +4dB line level output from a console or recording interface. Transformer isolation helps eliminate noise while maintaining a linear frequency response, and a mono balanced XLR output allows you to feed a recording interface or a PA system.
The Radial ProAV1 is a passive direct box designed to handle the extreme dynamics and frequency range that is now common with digital sources. Linear across the audio range, it exhibits low distortion at all frequencies, amazing signal handling and very little phase shift. The result is a clean, natural sounding rendition that is both noise-free and dependable.
Specifications - Audio circuit type: Passive, transformer based
- Transformer: Eclipse ET-DB2, 12:1 ratio
- Number of channels: Single channel (mono)
- Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
- Dynamic range: 128dB
- Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
- Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
- Input Impedance: 140k Ohms, unbalanced
- Output Impedance: 150 Ohms, balanced
- Common Mode Rejection Ratio: 100dB @ 60Hz
- Maximum Input: +18dB @ 20Hz
Features - Input pad, Mono Sum, Ground lift
- Input Connectors: 1/4\", RCA, 3.5mm TRS, XLR
- Output Connectors: XLR
- Extras: 1/4\" thru, RCA thru
General - Construction: 14 gauge steel chassis & shell
- Size (L x W x D): 3.25” x 5” x 1.875”
- Weight: 0.73kg (1.6 lbs)
- Shipping size (L x W x D): 102 x 76 x 165mm (4.00\" x 3.00\" x 6.50\")
- Shipping weight: 0.87 kg (1.92 lbs)
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
- Warranty: Radial 3-year, transferable

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|