Radial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier NEW! AUTHORIZED DEALER!!!
PRODUCT HIGHLIGHTS
- Increases Gain for Low Output Sources
- Boosts Signals to +4dB Line Level
- Transformer-Balanced XLR Outputs
- Versatile Inputs: RCA, 1/4 TRS, 1/8\"
The Radial J+4 Balanced Signal Driver is a stereo preamplifier designed to accept unbalanced, low output devices such as instruments, computers, or CD players and boost the signal to a balanced +4dB level.
The J+4 includes a variety of input connectors to accommodate most audio sources; a stereo pair of both 1/4\" and RCAs, and a single 1/8\" stereo input. The control panel is easy to operate, consisting only of a stereo level control, a high pass filter, and a ground lift. The boosted signal then outputs from a stereo pair of balanced XLRs.
The J+4 features 100% discrete components for optimal signal transfer. Noise is eliminated by combining the advantages of active signal buffering with transformer isolation, resulting in better than 95dB signal to noise ratio. This also ensures hum and buzz caused by ground loops, along with spurious noise from clocking, will not pollute the signal path.
The Radial J+4 is built to handle the extreme rigors of the professional audio world. It delivers exceptional sonic performance, plenty of headroom and ultra low noise making it the ideal addition to any audio system with low output sources.
Boosts Signals to +4dB Balanced Line LevelThe J+4 takes a -10dB consumer level audio product, such as an iPod or a DJ mixer, and boosts the signal to +4dB commercial level without adding noise or distortion.Versatile Input OptionsThe J+4 has input connectivity for dual 1/4\", dual RCA, and a single 1/8\" stereo input.Transformer IsolatedTransformer isolated circuitry eliminates noise caused by ground loops.
In the BoxRadial Engineering J+4 Balanced Signal Driver - Stereo Preamplifier
3-Year Limited Warranty, Transferable
Circuit TypeActive -10 dB to +4 dB line converter, transformer isolatedNumber of ChannelsStereoFrequency Response20 Hz to 20,000 Hz (± 2 dB)Dynamic Range102 dBMaximum Input Level+17 dBu @ 1 kHz, 1% THD+NTotal Harmonic Distortion0.004% @ 1 kHz, +10 dBu outputPhase Shift0.5° @ 100 Hz; 4° @ 20 HzInput Impedance10k Ohms, unbalancedOutput Impedance1.6k Ohms, balancedTransformerJS2 Radial custom transformerHPF-3 dB @ 100 Hz (12 dB/octave)LiftDisconnects XLR pin-1 at isolated outputInput Connections
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.