This is an RTS RP-1000 intercom keypanel user station with color LCD displays for the RTS digital matrix intercom system.
Keypanel has 32 multi-directional key switches for talk, listen, and level. Front panel also has a 4-pin XLR headset connector (for 4-pin XLR male terminated headsets), a panel microphone connector, color LCD displays (for intercom key/assignment identification), and volume control knobs.
This unit has the rear connector/GPIO option card installed which includes: XLR microphone in/out connectors,2 auxiliary inputs on XLR connectors, 4 additional auxiliary inputs on DB15 connector, DB9 headset connector, DB9 speaker and foot switch connector, and various GPIO input and outputs (on DB9 connectors).
Unit has a 2U rack mount form factor suitable for use in an console desk, production truck, OB van, equipment rack, or other location.
Condition: This is a new, open box item. Item is unused, but packaging may have been opened to inspect the contents and to take photos of the unit.
Includes:KP-1000 keypanel unit in original box.Additional information from the manufacturer:
RTS KP-1000 Series
Color Display Keypanel
The RP-1000 series keypanel from RTS is designed to enhance capability and ease of use. The intuitive graphical interface is housed
inside two (2) full-color 5.1” TFT displays. The front panel also features conveniences such as two (2)user-programmable buttons,
one-touch listen volume adjustment on each of the 32 multifunction user keys, and a backlit keypad. In addition, the RP-1000 can be
ordered with the more intuitive Standard key sequences or the Classic key sequences. Like all RTS products, the RP-1000 series
keypanel is designed with expansion in mind.
Features
- The color display hosts a rich and intuitive graphical user interface indicating different keypanel functions in different
colors. - The front panel is ergonomically designed to fit easily into any control room or truck application. The back panel is
optimized for future expansion.
- 32, multi-directional keys used for talk, listen, and level control function.
- Designed to allow for an expansion panel and optional connections to the matrix through current and future
transmission formats. - RP-1000 series allows up to six (6) auxiliary inputs, three (3) relays, independent digital gain control for microphone
sources, configurable audio routing and much more through an option board. - DSP processing, acoustic echo cancellation, equalization, mixing, filtering, and metering
- Works with both the RP-1932 expansion panel as well as the EKP 32 CLD legacy expansion panel.
- Two (2) user-programmable buttons (UPG-1, -2) provide custom shortcuts to menu functions.
- The rear connector kit option provides additional connectors for relay, headset, footswitch/speaker, mic in/out, auxiliary,
and other Display
- Size: 5.1” TFT
- Resolution: 576 x 172 (RGB)
Input Sources
Panel Microphone/GPIO MIC IN- Electric Microphone Input Level
- Nominal Level: -42.5dBu
- Maximum Level: -22.5dBu
- Impedance: 1k to 10k Ω
Headset
- Dynamic Microphone Input Level
- Nominal Level: -60dBu
- Maximum Level: -40dBu
- Impedance: ≤600Ω
- Electric Microphone Input Level
- Nominal Level: -45dBu
- Maximum Level: -25dBu
- Impedance: 1k to 10kΩ
Keypanel Input
- Nominal Input Level: 8dBu
- Maximum Input Level: 20dBu
Auxiliary Input
- Nominal Input Level: 8dBu
- Maximum Input Level: 20dBu
Output Sources
Keypanel Output
- Nominal Input Levels: 8dBu
- Maximum Input Level: 20dBu
- Frequency Response: 100–15 kHz ±2dB
MIC OUT
- Nominal Input Level: 8dBu
- Maximum Input Level: 20dBu
- Frequency Response: 100–15kHz ±2dB
Headphone Speaker
- Power: 80mW into 600Ω
- Impedance: ≥8Ω
Panel Speaker
- Frequency Response:
- 100–15kHz ±2dB
- Sensitivity, W/dB: 84
- Power: 4W, 8Ω
Tone Generator
- Output Level: 8dBu
- Output Frequency: 500Hz or Microphone: ¼” Jack
- Panel Headset: 4- or 5-pin female XLR
- Keypanel audio input/output: DB-9, RJ-45 (Supports RTS RJ-12 cabling or standard CAT-5 cabling)
- Expansion: RJ-45
- GPIO MIC OUT: male XLR-3
- GPIO MIC IN: female XLR-3
- GPIO Aux 1–2: female XLR-3
- GPIO Aux 3–6: DB-15
- GPIO Headset: DB-9
- GPIO Relays: 1–3 DB-9
- GPIO Open Collector: DB-9
- GPIO Opto-Isolators 1–4: 19” L x 3.47” H x 3¼” D (482.6mm x 88.138mm x 82.55mm)
- Weight:6.00lbs (2.72kg) (no option cards installed)
- Weight:6.32lbs (2.86kg) (GPIO option card installed)
Power:- Input Power:100~240VAC, 50 - 60Hz
- Power Consumption (no option cards installed):@120VAC 33VA / @220VAC 41VA
- Power Consumption (GPIO option card installed): @120VAC 53VA / @220VAC 63VA
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.