|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
RTS KP-32 32-Position Matrix Intercom Keypanel User Station KP32BLK-4F-RC-NC
$1,095.00

This is an RTS KP-32 intercom keypanel user station for the RTS digital matrix intercom system. Keypanel has 32 lever switches (30 for intercom talk/listen assignment, 1 for call waiting, and 1 for headset mic selection and volume setup). Front panel also has a 4-pin XLR headset connector (for 4-pin XLR male terminated headsets), a panel microphone connector, display (for intercom key/assignment identification), and a volume control knob. This unit has the rear connector/GPI module which includes 2 XLR auxiliary inputs, XLR microphone in/out connectors, DB9 headset connector, DB9 speaker and foot switch connector, and various GPIO input and outputs (on DB9 connectors). Unit has a 2U rack mount form factor suitable for use in an console desk, production truck, OB van, equipment rack, or other location. Condition: This is a new, open box item. Item is unused, but packaging may have been opened to inspect the contents and to take photos of the unit. Includes: Keypanel unit, AC to DC power supply, instruction manual, original box.Additional information from the manufacturer: RTS KP-32 32-Position Keypanel The RTS® Model KP-32 keypanel fits in a standard 19” rack and is two rack spaces high. It has 32 lever keys: 30 keys are for intercom talk/listen assignment; one key is for call waiting response; and one key is for headset/microphone/program selection and volume setup. The KP-32 combines all of the programmable features of the KP-9X Series keypanels and the KP-12 key- panel. It adds significant new features such as digital signal processing and binaural headset operation with left/right assignment of audio signals. The KP-32 also introduces large, super-bright, long-life fluorescent displays with adjustable brightness control, making it suitable for all types of ambient lighting from direct sunlight to fluorescent displays: Provide much better visibility and usable life than LCD displays. A display saver mode with programmable scrolling message extends display life and conserves power during periods of inactivity. 32 lever keys, with 30 keys available for full talk/listen configuration: Doubles the number of channels over the KP-9X series keypanels. Keys support both latching (hands-free) and momentary (push-to-talk) operation.Enhanced programming keypad: Provides the complete KP-9X keypad sequences, plus new keypad sequences, plus an extensive scrollable menu system. Menus include helpful prompts to walk the user through setup.Only 90 mm deep behind the front panel (approximately 130mm with connectors): Perfect for consoles, OB vans, etc.Digital Signal Processing (DSP): Improves microphone voiceactivation and limiting. Adds new mixing, metering, and filtering capabilities.Monaural (4-pin) Headset Connector: For monaural operation, the mixer lets you select which items are monitored in the headphones.Easy upgrades: Firmware updates can be received via the internet, for example, and then downloaded to the KP-32 via the intercom connection. Ready for future communication enhancements, including coax, fiber, and ISDN. (For further information, search for keyword “firmware” in AZedit Preamplifier- Electret Mic Input Level @ 1 kHz: -42 dB, 150
- Dynamic Mic Input Level @ 1 kHz: -50 dBm, 150
- Output Level (to matrix): +8 dBu, ±0.2 dBu
- Max Voltage Gain, Mic to Line: 70dB, ± 2 dB
- Frequency Response: 100 Hz to 10kHz, ± 2 dB
- Limiter: 8 dB above nominal
Tone Generator- Output Level (to matrix): +8 dBu ±2 dBu
- Output Frequency: 500 Hz
Headphone Amplifier- Maximum Voltage Gain: 200 dB
- Frequency Response: 100 Hz to 10 kHz, ± 2 dB
- Headphone Impedance: 8 to 600
- Output Power: 1 W into 50
- Output Voltage Level: 8 volts peak-to-peak (max.)
- Sidetone Range: 25 dB
Speaker Amplifier & Speaker- Frequency Response: 100 Hz to 10 kHz, ± 2 dB
- Output Power (per amplifier): 4 watts into 4
- Output Voltage Level: 12 volts peak-to-peak (max.)
- Volume Control Range: 30 dB
- Speaker Rating: 4 watts max
Intercom Input/Output- Input: Nominal: +8 dBu. Peak: ± 20 dBu max.
- Output: +8 dBu, ± 2 dBu nominal
- External Line Input: (Program Input)
- Input Level: +8 dBu nominal
General- AC Supply: External, switching type, 100-240 VAC, 50/60 Hz with locking DIN connector for attachment to the keypanel and universal IEC connector for connection to various AC mains -40°C to +60°C
- Operating: -10°C to +41°C
Dimensions- 19” (482.6 mm) W x 3” (76.2 mm) H x 3.5” (90 mm) D
WeightConnectors (Other Connector Options Available)- Panel Microphone Connector Type: 3-circuit, ¼” phone jack w/threaded metal bushing, compatible w/ RTS® MCP5/6 [Pin-out: Tip: +Audio and DC bias; Ring: Common; Sleeve: Chassis ground]
- Headset Connector Type: XLR-4 female [Pin-out:Pin 1: Mic low; Pin 2: Mic high; Pin 3: Common; Pin 4: Headphone high]
- Power Input Connector Type: 5-pin locking DIN [Pin-out:Pin1: Common; Pin2: Common; Pin3: +5VDC, 1.50A Max.; Pin4: -15VDC, 0.150A Max.; Pin5: +15VDC, 0.5A Max.]
- Intercom Connectors: Parallel-wired DB9S and RJ-12 Connectors
- Type: DB9S [Pin-out: Pin 1: Data +; Pin 2: Data -; Pin 3: Audio in (from matrix) shield; Pin 4: Audio out (to matrix) +; Pin 5: Audio out (to matrix) -; Pin 6: Data shield; Pin 7: Audio in (from matrix) -; Pin 8: Audio in (from matrix) +; Pin 9: Audio out (to matrix) shield]
- Type: RJ-12 [Pin-out Pin 1: Data -; Pin 2: Audio in (from matrix) +; Pin 3: Audio out (to matrix) +; Pin 4: Audio out (to matrix) -; Pin 5: Audio in (from matrix) -; Pin 6: Data +]
- Expansion ConnectorType: RJ-45
- LCP Connector Type: RJ-45
KP-32-RC Specifications- EXT MIC IN External balanced dynamic-mic connector
- Type: 3-pin Female XLR Audio Connector
- Pin 1: Shield (circuit common); Pin 2: Mic input +; Pin 3: Mic input -
- EXT LINE IN Balanced Program Audio Input
- Type: 3-pin Female XLR Audio Connector
- Pin 1: Shield (circuit common); Pin 2: Audio input -; Pin 3: Audio input +
- MIC PRE OUT Unswitched, Balanced Microphone Output
- Type: 3-pin Female XLR Audio Connector
- Pin 1: Shield (circuit common); Pin 2: Audio output -; Pin 3: Audio output +
- HEADSET External Headset Connector
- Type: 9-Pin Male D-sub
- Pin 1: External balanced dynamic mic input -; Pin 2: External balanced dynamic mic input shield (common); Pin 3: Headset balanced dynamic mic input +; Pin 4: Headset balanced dynamic mic input -; Pin 5: Headphone +; Pin 6: External balanced dynamic mic input +; Pin 7: Electret mic audio input + and +5VDC bias; Pin 8: Electret mic common; Pin 9: Headphone

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|