PPB detection for ArsineAsH3 and Hydrogen Selenide H2Se
PPB or PPM digital display
Easily transportable
Panel mounting configuration available
Cassette tape remainder display included
Self-diagnostic functions
Two alarm levels
Interference – free detection
Ideal for detecting new ACGIH’s TLV level for Arsine
Model
FP-301
Detection principle
Photoelectric photometry method using tape cassette
Detection tape
Plug in cassette
Target Gas and Detection range
Arsine: 0-15 ppb Hydrogen Selenium: 0-200 ppb
Sampling method
Internal sample drawing pump
Gas concentration display
Digital display by LCD
Alarm Indication
Warning and alarm with audible and visual indications
Alarm relay output
Common contact for each WARNING, ALARM and trouble, latched mode, rated 0.5A at 125VAC (resistive load)
Alarm display
Gas Alarm: Yellow warning light, Red alarm light and buzzer sound Trouble Alarm: Flashing green light
Self diagnosis
Sensor failure, low flow, tape cut, tape end notice, tape end, tape set failure, system trouble
External output signal
4-20mA (300 Ω at maximum load resistance)
Operating temperature & humidity
41-95°F 5~35°C30~90% RH (non condensing)
Power supply & power
24VDC +/- 10% for panel mounting 100 VAC-220VAC+/-10%, 50/60 Hz (desktop type) Please specify the mounting type and power supply when ordering
Dimensions & weight
Panel mounting: Approx. 6.5″(W) x 6.5″(H) x 10.3″(D) Approx. 14.33lb Desktop: Approx. 6.5″(W) x 7.8″(H) x 10.4″(D) Approx. 12.125lb
30 days returns