RFID RING UID CHANGEABLE WRITABLE IC T5577 JAKCOM R4 SMART NFC 125KHz 13.56MHz
Don\'t like carrying your access card or key fob around? Copy the data to a ring and look great and never worry about forgetting your card or keyfob again!
Please note that you need a device to read or write the ring.
Choose from one of the three types of rings in the drop down box above.
GEN1 UID 4 Bytes Black RingSpecifications
- Material: Zirconia Ceramic + Epoxy Resin
- Thickness: 2mm
- Frequency: 13.56 Mhz
- Colour: Black
- Induction Distance: 2-5cm
- Waterproof: Yes
Features
- All blocks (including Block 0) can be re-written multiple times
- Use ProxMark3 (Magic Chinese Guy function) or libnfc to change UID.
- Uses \"backdoor\" technique to change/rewrite UID.
- UID can be changed multiple times.
- Not suitable for MCT Mi fare Classic Tool. Suitable for MWT Mi fare Windows Tool.
- Answers to Chinese magic backdoor commands (GEN 1a): YES
- Suitable for 4 Bytes UID
T5577 125KHz Low Frequency RFID ID Black RingSpecifications
- Contactless Read/Write Data Transmission
- Radio Frequency from 100kHz to 150KHz
- 7x32-bit EEPROM Data Memory Including 32-bit Password
- Separate 64-bit memory for Traceability Access Control, Personal Identification, Logistic automation, etc.
JAKCOM R4 Smart RingSpecifications
- Carrier Frequency: 13.56MHz, 125KHz
- RF Distance: 1-3 cm
- IC Module Type: UID 4 Bytes
- ID Module Type: T5577
- NFC Module Type: NTag213
- Ring Material: Ceramics
- Protection Grade: IP68
- Operating temperature range: -50°C - +80°C
- Dust Proof: Yes
- Water Proof: Yes
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.