RDL RU-MLB2P Dante 2x2 Mic/Line Network Interface PoE P48 Phantom

Free Shipping on
Thousands of Products We Ship
Internationally Technical Support
for All Products

• Categories
• Audio/Video Switchers
• Audio/Video Extenders
• Converters and Scalers
• Cables and Adapters
• Audio and Accessories
• TVs and Projectors
• Video Walls and Multiviewers
• Digital Signage
• Video Over IP
• Video Recording and Editing
• Security Equipment
• Computer Accessories
• Mounting Solutions
• Power Management

RDL RU-MLB2P 2x2 Mic/Line Bi-Directional Dante Network Interface / PoE / P48 Phantom Manufacturer:RDL SKU:RU-MLB2P Condition:New Warranty:3 Years

The RU-MLB2P is a compact 2x2 bi-directional Dante network audio interface that connects microphones and line-level sources to Dante networks and provides balanced line outputs from Dante channels. It supports 24-bit conversion and standard sample rates to integrate with professional AV systems. The unit is designed for rack, shelf, or surface mounting for commercial installations.

The module converts two mic or line inputs into Dante network channels and converts two Dante channels to balanced +4 dBu line outputs. Each input is selectable between mic and line and supports automatic microphone gain switching of 40 dB for condenser microphones and 60 dB for dynamic microphones. P48 phantom power is provided on each mic input to support condenser microphones.

Audio performance uses 24-bit analog to digital and digital to analog converters and supports 44.1 kHz and 48 kHz sample rates with a default of 48 kHz. Network operating level is -18 dBFS equals +4 dBu and outputs provide greater than 18 dB headroom. Distortion and noise specifications deliver professional audio quality with THD+N below 0.1% on inputs and below 0.05% on outputs.

Network connectivity is via a single RJ45 port using Dante over 100 Mbps Ethernet. The RU-MLB2P supports PoE Class 0 IEEE 802.3af for network-powered operation and will also accept an external 24 Vdc supply while retaining PoE standby capability. Front-panel LEDs indicate input and received signal levels, network link and sync status, and power presence to aid installation and troubleshooting.

This module is intended for use in conference rooms, lecture halls, houses of worship, broadcast facilities, and distributed audio systems where microphone and line sources must be routed over Dante networks. It provides simple integration for converting legacy analog signals to network audio and returning network channels to balanced line outputs. The automatic mic gain and selectable input types reduce setup time and eliminate the need for per-channel gain adjustments during microphone changes.

Built in an all-metal enclosure, the RU-MLB2P is engineered for continuous duty in commercial installations and supports rack or surface mounting. Installation is straightforward using detachable terminal blocks for audio connections and a standard IEC style of network connector. The unit is manufactured in the U.S.A and designed for long-term reliability in professional AV ConnectorRJ45 with Link and Speed indicatorsDigital Audio Ethernet ProtocolDanteTransmission Rate100 MbpsSample Rates Supported44.1 kHz, 48 kHz [default)Bit Depth Supported24 bitsAudio Operating Levels-18 dBFS = +4 dBuMic/Line Inputs to Network Interface SectionMic InputsInputs (2)Balanced, detachable terminal blockGainAutomatic; 40 dB for condenser mics, 60 dB for dynamic micsInput Level for +4 dBu56 dBu (dynamic), -36 dBu maximum; -36 dBu (condenser), -19 dBu maximum (undipped), -14 dBu maximum [soft clipped)Input Impedance> 1 kOPhantom PowerP48, 48 VdcStandard for PhantomIEC 61938: 2013Frequency Response20 Hz to 20 kHz [± 0.5 dB)THD+N< 0.1%Ncise below -4 dBu< -70 dBCMRR> 70 dB (50 to 120 Hz)Crosstalk< 70 dB (20 to 20 kHz)Line InputsInputs (4)Balanced, detachable terminal block (2); Unbalanced, detachable terminal block (2)Input Level for -4 dBu+4 dBu (balanced); -10 dBV (unbalanced)Input Impedance> 20 kOFrequency Response20 Hz to 20 kHz (± 0.5 dB)THD+N< 0.1%Ncise below -4 dBu< -75 dBCMRR> 60 dB (50 Hz to 120 Hz)Crosstalk< 75 dB (1 kHz, any line to any mic channel), < 70 dB (20 to 20 kHz)Headroom above +4 dBu> 18 dBNetwork to Line Level Interface SectionOutputs (2)Balanced, detachable terminal blockOutput Level+4 dBu (nominal)Output Impedance150 O balanced; 75 O unbalancedFrequency Response20 Hz to 20 kHz (± 0.5 dB)THD+N< 0.05%Ncise below -4 dBu< -80 dB [cutout active); < -95 dB (outputs muted)Crosstalk< 85 dB (20 Hz to 20 kHz)Headroom above +4 dBu> 18 dBSelectors (2)MIC or LINE (rear panel)Indicators (9)Power In (1); Output Signal LEDs (2); Input Signal LEDs (2); Network Sys and Sync (2), Ethernet Link and Speed (2)Power Connections (2)Power Jack; Detachable Terminal BlockAmbient Operating Environment0° C to 40° CPower Requirement24 Vdc at 175 mA plus connected phantom loads, or PoE (RU-MLB2P)PoE (RU-MLB2P)Class 0, IEEE 802.3afDimensions5.8\" (15 cm) W; 1.7\" (4.3 cm) H; 5.2\"1 (13.2 cm) DPackage TypeCardboard BoxPackage Dimensions6 x 6 x 2.625 in.Shipping Weight1.774 lbs. (RU-MLB2); 1.799 lbs. (RU-MLB2P)WEEE weight1.514 lbs. ;RU-i-1LB2); 1.539 lbs. (RU-MLB2P)Tariff code8517.18.0050 OUR PERKS Great Prices and
Exclusive Offers
Every Day Ask Professional Advice via Messages Free Technical Support
for All Products We Ship
Internationally Other Information

• About Us About Us Delivering Audiovisual Solutions You Can Trust Since 2005!

  Located in Northern California, BZB Express has been a trusted supplier of Audio/Video and Broadcast Equipment since 2005. Our exclusive partnerships with highly regarded manufacturers enable us to offer the most competitive prices to dealers, resellers, commercial integrators, and end-users. BZB Express is built on a foundation of excellent service, dependable products, and efficient delivery. We aim to enhance your experience, whether you\"re shopping with us or seeking answers to your questions. We provide honest, unbiased information to help you make informed decisions when making a purchase.

• Shipping Shipping OUR \"FIVE STAR\" SHIPPING SERVICE GUARANTEE:

  Low cost

  Fast Processing

  Safe Packaging

  Tracking Number

  Quick Delivery

  The shipping table below is provided as a general reference guide. Specific shipping details for your purchase will be available during checkout.

  Method Processing Time In Transit Time Total Time* FedEx Ground Within 24 Hrs (Mon-Fri) 4-7 Days (Mon-Fri) 5-8 Days FedEx Express Saver (3 Days) Within 24 Hrs (Mon-Fri) 3 Days (Mon-Fri) 3-4 Days FedEx 2nd Air Within 24 Hrs (Mon-Fri) 2 Days (Mon-Fri) 2-3 Days FedEx Overnight Within 24 Hrs (Mon-Fri) 1 Day (Mon-Fri) 1-2 Days

  *Estimated delivery time. It may vary, especially during peak holiday periods.

  
  Please note:

  - All orders are processed and shipped on business days only, Monday through Friday, excluding major holidays.
  - Orders placed on Saturday and Sunday will be processed on the following business day.
  - We ship to PO Boxes and APO/FPO addresses.

  
  International Customers:

  We offer shipping through USPS, FedEx, and DHL for our international customers. All shipping details specific to your purchase will be provided at checkout.

  
  International Buyers Please Note:

  The buyer is responsible for any applicable import duties and local taxes. If you have any questions, please check with your customs office before making a purchase.

• Contact Us Contact Us

  Hours of Operation: Monday - Friday 8:00 AM - 5:00 PM PST If you have any questions or concerns about our products or your order, please contact us via messages.