RDL FP-NML2 Dante 2-Channel Network to Mic/Line Interface Balanced

Free Shipping on
Thousands of Products We Ship
Internationally Technical Support
for All Products

• Categories
• Audio/Video Switchers
• Audio/Video Extenders
• Converters and Scalers
• Cables and Adapters
• Audio and Accessories
• TVs and Projectors
• Video Walls and Multiviewers
• Digital Signage
• Video Over IP
• Video Recording and Editing
• Security Equipment
• Computer Accessories
• Mounting Solutions
• Power Management

RDL FP-NML2 2-Channel Dante to Mic/Line Interface / 2 Balanced Outputs / Mic/Line Switch Manufacturer:RDL SKU:FP-NML2 Condition:New Warranty:3 Years

The FP-NML2 is a Dante network audio interface that converts two digital audio channels into professional analog mic or line outputs. It supplies balanced line-level outputs and switchable mic attenuation to interface directly with mixers and amplifiers. The unit is built for continuous duty installations and ships in a compact metal enclosure.

Key features include two independent Dante channels converted to balanced outputs, recessed mic/line switches with 50 dB attenuation, and high-resolution 24-bit digital-to-analog conversion. Line outputs are calibrated so -18 dBFS equals +4 dBu nominal, providing >18 dB headroom. The analog section uses precision filtering and low-noise design to maintain audio integrity across the band.

Performance specifications include 24-bit conversion, support for 44.1 kHz and 48 kHz sample rates, THD+N below 0.1%, and noise floor better than -80 dB when outputs are active. Crosstalk is below the noise floor across the audio band, and frequency response is 20 Hz to 20 kHz +/- 0.5 dB. The device mutes outputs when digital inputs are inactive to prevent noise in downstream equipment.

Connectivity is straightforward: an RJ45 Dante network connector with link and speed indicators, two balanced detachable terminal-block outputs, and two power connection options including a 24 Vdc jack and detachable terminal block. The FP-NML2P variant supports IEEE 802.3af Class 0 PoE and can operate in normal or hot-standby modes. A 24 Vdc pass-through jack allows power sharing with compatible RDL FLAT-PAK amplifiers.

This interface suits a wide range of installations including installed sound systems, conferencing rooms, and distributed audio networks where existing analog amplifiers or mixers must be integrated into Dante networks. Installers can use the mic/line switches to feed mic-level inputs on amplifiers without additional pads or adapters. The compact footprint supports rack, shelf, or surface mounting in equipment closets and furniture.

Installation and operation are designed to be simple and reliable. The metal enclosure and LED indicators provide clear operational status and durable protection in commercial environments. Power options, detachable connectors, and industry-standard Dante integration streamline system deployment and ConnectorRJ45, Link, Speed indicatorsDigital Audio Ethernet ProtocolDanteTransmission Rate100 MbpsSample Rates Supported44.1 kHz, 48 kHz (default)Bit Depth Supported24 bitsAudio Operating Levels-18 dBFS = +4 dBuOutputs (2)Balanced, detachable terminal blockOutput Level+4 dBu nominalOutput Impedance150 Ohm balanced, 75 Ohm unbalancedFrequency Response20 Hz to 20 kHz +/- 0.5 dBTHD+N< 0.1%Noise below +4 dBu< -80 dB output active, < -95 dB outputs mutedCrosstalk< 90 dB 1 kHz, < 80 dB 20 Hz to 20 kHzHeadroom above +4 dBu> 18 dBIndicators (3)Ethernet Link, Speed, SYNCPower Connections (2)Power Jack, Detachable Terminal BlockAmbient Operating Environment0° C to 40° CPower Requirement24 Vdc at 100 mA, PoE optional (FP-NML2P)PoE (FP-NML2P)Class 0, IEEE 802.3afDimensions4.85 in W, 1.75 in H, 3.25 in DPackage TypeCardboard BoxPackage Dimensions4.375 x 4.8 x 2.25 inShipping Weight0.791 lbs FP-NML2, 0.816 lbs FP-NML2PWEEE weight0.645 lbs FP-NML2, 0.67 lbs FP-NML2PTariff code8517.18.0050 OUR PERKS Great Prices and
Exclusive Offers
Every Day Ask Professional Advice via Messages Free Technical Support
for All Products We Ship
Internationally Other Information

• About Us About Us Delivering Audiovisual Solutions You Can Trust Since 2005!

  Located in Northern California, BZB Express has been a trusted supplier of Audio/Video and Broadcast Equipment since 2005. Our exclusive partnerships with highly regarded manufacturers enable us to offer the most competitive prices to dealers, resellers, commercial integrators, and end-users. BZB Express is built on a foundation of excellent service, dependable products, and efficient delivery. We aim to enhance your experience, whether you\"re shopping with us or seeking answers to your questions. We provide honest, unbiased information to help you make informed decisions when making a purchase.

• Shipping Shipping OUR \"FIVE STAR\" SHIPPING SERVICE GUARANTEE:

  Low cost

  Fast Processing

  Safe Packaging

  Tracking Number

  Quick Delivery

  The shipping table below is provided as a general reference guide. Specific shipping details for your purchase will be available during checkout.

  Method Processing Time In Transit Time Total Time* FedEx Ground Within 24 Hrs (Mon-Fri) 4-7 Days (Mon-Fri) 5-8 Days FedEx Express Saver (3 Days) Within 24 Hrs (Mon-Fri) 3 Days (Mon-Fri) 3-4 Days FedEx 2nd Air Within 24 Hrs (Mon-Fri) 2 Days (Mon-Fri) 2-3 Days FedEx Overnight Within 24 Hrs (Mon-Fri) 1 Day (Mon-Fri) 1-2 Days

  *Estimated delivery time. It may vary, especially during peak holiday periods.

  
  Please note:

  - All orders are processed and shipped on business days only, Monday through Friday, excluding major holidays.
  - Orders placed on Saturday and Sunday will be processed on the following business day.
  - We ship to PO Boxes and APO/FPO addresses.

  
  International Customers:

  We offer shipping through USPS, FedEx, and DHL for our international customers. All shipping details specific to your purchase will be provided at checkout.

  
  International Buyers Please Note:

  The buyer is responsible for any applicable import duties and local taxes. If you have any questions, please check with your customs office before making a purchase.

• Contact Us Contact Us

  Hours of Operation: Monday - Friday 8:00 AM - 5:00 PM PST If you have any questions or concerns about our products or your order, please contact us via messages.