|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
RANSANX IR Break Beam Sensor 5mm Photoelectric Counter Module NPN DC5V
$19.99

Overview The RANSANX IR break beam sensor is a split through-beam photoelectric switch that detects the presence or absence of an object when the infrared light path between the emitter and receiver is interrupted. Because it reacts to any reflective or opaque object rather than to body heat, it responds faster than a typical PIR sensor and gives you precise control over exactly where motion or counting is detected. Built around a 5 mm LED pair with a 1 meter detection range, this module is a practical building block for counting, position sensing and presence detection on relays, PLCs, 51 microcontrollers, STM32 boards and Arduino projects. The NPN normally open output can drive a relay directly, and the compact housing fits neatly into tight enclosures and machine frames. Key Features - Brand: RANSANX
- Sensing Method: Infrared through-beam interruption (passive light path, no heat detection)
- Detection Distance: 1 meter
- Output Type: NPN normally open, output current up to 70 mA
- Supply Voltage: DC 5 V, emission current 20 mA, reception current 10 mA
- Response Time: 2 milliseconds
- Beam Angles: Emission angle under 5 degrees, reception angle under 10 degrees
- Operating Temperature: -10 °C to 60 °C
- Material: Silicon housing with 30 cm cable leads
Highlights - ✓ Detects any reflective object, not just metal, so it works with hands, boxes, parts and products on a line
- ✓ Fast 2 ms response and a narrow beam keep counting accurate at higher speeds
- ✓ 70 mA output drives a relay directly, simplifying your control wiring
- ✓ Compact split design makes alignment and mounting in tight spaces easy
- ✓ Long 50,000 hour working life for continuous duty applications
Usage Wire the red lead to the positive supply, the black lead to ground and the yellow (or white) lead to the signal input. Add a 1K pull-up resistor between the positive supply and the signal line to connect straight to a microcontroller IO port. The module is suited to object counting, conveyor and gate position checks, edge detection and simple presence sensing in indoor environments. Choose your preferred pack size from the drop-down menu to match the number of sensor pairs you need for your project or spare parts stock. In the Box - IR break beam sensor module set (quantity according to the pack size you select)
Please Note - This sensor is designed for indoor use only and is not waterproof.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|