|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
QSC CX702 2-Channel 700W @ 4 Ohms Power Amplifier
$1,250.99

TheCX-702 2-Channel Direct Output Power AmplifierfromQSCis a 2-channel, low-impedance 425W output amplifier. It features PowerLight switch-mode power supply technology for high performance and has an integrated security cover designed for tamper-proof installations. This unit has a variable-speed fan to maintain low noise, and 1 dB detented gain controls for fast and accurate gain settings. The active inrush limiting is designed to eliminate AC inrush current, and a class-H complementary bipolar output circuitry is integrated for high efficiency. The CX-702 features XLR and detachable Euro-style input connectors and a barrier strip output connector. It also has an HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring as well as a DIP switch control for clip limiters, high-pass filters, bridge-mono, and parallel operation. The selectable high-pass filters protect speakers and prevent speaker transformer saturation. The unit\'s front-panel indicators include signal, clip, protect, bridge-mono, and parallel input LEDs. A comprehensive protection circuitry with DC, infrasonic, thermal overload, and short-circuit protection is also featured. This unit is rack-mountable and 14\" deep for reduced rack cost and floor space. It is RoHS compliant and cULus listed. - Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Custom integrated security cover for tamper-proof installations
- Variable speed fan for low noise
- 1 dB detented gain controls for fast and accurate gain settings
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- XLR and detachable Euro style input connectors
- HD15 DataPort connector for Q-SYS networked control and monitoring
- Dip switch control for clip limiters, high-pass filters, bridge-mono, and parallel operation
- Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (33 Hz or 75 Hz)
- Comprehensive front-panel indicators including signal, clip, protect, and QSC\'s exclusive bridge-mono and parallel input LEDs
- Barrier-strip output connector
- Comprehensive protection circuitry including DC, infrasonic, thermal overload, and short-circuit protection
- Optional external transformer accessory pack for isolated 25-, 70-, and 100-volt outputs (converts CX302 to 400 watts per channel, or 300 watts into 25 V)
- Compact size—only 2 RU high and 14\" deep for reduced rack cost and floor space
CX 2-Channel Series The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the ground up, combining QSC\'s exclusive PowerLight® technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX Series is the ideal solution to any permanently installed sound system. Advanced monitoring and control when used with a Q-Sys or BASIS system. Learn more The model line incorporates QSC\'s exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V, provide direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 offer low impedance capability and range in power from 325 watts to 1100 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD). The versatile CX902 and CX1102 have the ability to drive both 70 volt and low impedance loads for maximum flexibility. The CX amplifiers are equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers. CX amplifiers also include an HD15 Data Port connector to interface with Q-Sys and QSControl networked audio systems, for remote amplifier monitoring and control. General Features: - 2 Channel Professional Power Amplifier
- 8 models to meet your exact power requirements:
- Three 70 volt direct models
- Five low impedance models, the CX902 and CX1102 also directly drive 70 volt loads
- Exclusive PowerLight switch-mode power supply technology for high performance and compact size
- Custom integrated security cover for tamper proof installations
- Variable speed fan for low noise
- 1 dB detented gain controls for fast and accurate gain settings
- Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
- XLR and detachable Euro style input connectors
- HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
- Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
- Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material (33 Hz or 75 Hz on non-V models, 50 Hz or 75 Hz on V models)
- Comprehensive front panel indicators including signal, clip, protect and QSC\'s exclusive bridge mono and parallel input LEDs
- Barrier strip output connector
- Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
- Class H complementary bipolar output circuitry for high efficiency (CX702, CX902, CX1102 & CX1202V)
- Optional external transformer accessory pack for isolated 70 and 100 -volt outputs (converts CX302 to 400 watts per channel isolated output)
- Compact size - all models are only 2 rack units high and 14\" deep for reduced rack cost and floor space
- Light weight - all models weigh only 21 pounds (9.5 kg) for easier racking and shipping
- All CX Series amplifiers meet the European Union\'s, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices
- 3-year Manufacturer\'s MODE, Both Channels Driven8 ohms, 20 Hz-20 kHz, 0.05% THD200 W300 W425 W550 W700 W-550 W700 W4 ohms, 20 Hz-20 kHz, 0.05% THD325 W500 W700 W900 W1100 W--1100 W2 ohms, 1 kHz, 1% THD600 W800 W1200 W1500 W1700 W---70V, 20 Hz-20 kHz, 0.05% THD400 W
(with IT-42*)--400 W800 W200 W400 W800 W70V, 1 kHz, 0.05% THD---440 W1000 W250 W440 W1000 W70V, 1 kHz, 1% THD---600 W1200 W300 W600 W1200 WBRIDGED MONO MODE16 ohms, 20 Hz-20 kHz, 0.1% THD400 W600 W850 W1100 W1400 W-1100 W1400 W8 ohms, 20 Hz-20 kHz, 0.1% THD700 W1100 W1500 W2000 W2200 W--2200 W4 ohms, 1 kHz, 1% THD1200 W1600 W2400 W3000 W3400 W---140V, 20 Hz-20 kHz, 0.05% THD---800 W1600 W400 W800 W1600 W140V, 1 kHz, 0.05% THD---880 W2000 W500 W880 W2000 W140V, 1 kHz, 1% THD---1200 W2400 W600 W1200 W2400 WNoise, 20 Hz-20 kHz>-107 dB>-107 dB>-106 dB>-106 dB>-106 dB>-106 dB>-106 dB>-106 dBInput Sensitivity @ 8 ohms1.26 Vrms1.23 Vrms1.16 Vrms1.17 Vrms1.35 Vrms1.26 Vrms1.26 Vrms1.26 VrmsVoltage Gain @ 8 ohms 30 dB32 dB34 dB35 dB35 dB35 dB35 dB35 dBOutput CircuitryAB+BAB+BH, 2-tierH, 2-tierH, 2-tierAB+BAB+BH, 2-tierALL MODELSDistortion (SMPTE-IM)Less than 0.02%Distortion (Typical) 20 Hz-20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power Less than 0.01% THD Less than 0.01% THDFrequency Response20 Hz-20 kHz, +/- 0.2 dBDamping FactorGreater than 500Input Impedance6k ohms unbalanced, 12k ohms balancedInput Clipping10 Vrms (+22 dB)CoolingVariable-speed fan, rear-to-front air flowConnectors, each channel
Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel) Output: Safety-shrouded barrier stripAmplifier ProtectionFull short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads.Load ProtectionOn/Off muting, DC-fault power supply shutdownDimensions
19\" (48.3 cm) wide, 3.5\" (8.9 cm) tall (2 RU), 14\" (35.6 cm) deep (from front mounting rails)Weight21 lbs (9.5 kg) net 27 lbs (12.3 kg) shippingSpecifications & DetailsPower SpecificationsNumber of Channels2 ChannelsContinuous Power @ 8 ohm425watts x 2channelContinuous Power @ 4 ohm700watts x 2channelContinuous Power @ 2 ohm1200watts x 2channelContinuous Power @ 8 ohm (Bridged)1500watts x 1channelContinuous Power @ 4 ohm (Bridged)2400watts x 1channelTotal Continuous Power2400wattsAmplifier SpecificationsAmplifier ClassA/BSignal-to-Noise Ratio> -106dBFrequency Response20 - 20000HzTHD (Total Harmonic Distortion)0.01%Voltage Gain34dBCooling OptionsCooling FanInputsEuroblockOutputsXLRPhysical (Pounds)21lbsRackmount Spaces2U

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|