Official StoreresponseVisit StoreQIACHIP RX480E 433MHz RF Transmitter Receiver Module, 4CH EV1527 KitKey Highlights
- QIACHIP RX480E Receiver & TX118SA Transmitter Kit supports 3 working modes: Momentary Mode, Toggle Mode, Interlock Mode, easily configured via the receiver learning button without jumper wires
- Wide application for remote control switches, electric doors, garage door openers, lighting, smart home, alarm systems and DIY electronic projects
- Superheterodyne receiving design delivers high sensitivity and strong anti-interference for stable 433MHz wireless signal transmission
- Compact small size: Receiver module measures 1.1in × 0.47in, transmitter module is 0.74in × 0.74in, easy to embed into various equipment and circuit projects
- EV1527 learning code 4-channel RF module, compatible with Arduino, ESP32 and Raspberry Pi for microcontroller development
Product Description
Transmitting power: 11dbm
Emission current: 10 mA
Rate of fire: maximum 10KB / S
Operating Voltage: DC 3V-24V
Encoding: EV1527 1527 Learning code
Each module has a unique ID address code.
All modules K1-K4 four key code is the same.
Quiescent Current: ≤5mA
Output current: 10 mA
Working Frequency: 433MHz
Receive Sensitivity: -108dB
Working Temperature: -25~75
Working mode: Momentary Mode, self-locking Mode(Toggle-Mode of the 4 Channels), interlock Mode,Mixed Mode
The output: 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons.
GND: ground or negative pole
The pin relationships corresponding to the 4 output CMOS level signals are as follows:
1. Delete existing data: Press learning button(on the receiver) 8 times. Response: LED flashes 7 times.
2. Learning remote code: press learning button(on the receiver) once, twice or three times (see below).
Response: LED turns on: learning mode is active.
3.Press any button of the transmitter. Response: LED indicator flashes three times: learning successfully completed.
- Brand: QIACHIP
- Model Number: tx118sa-4 rx480e-4
- Color: blue;green
- Manufacturer: Shenzhen Keshilian Electronic Technology Co., Ltd
- Maximum Range: 68 meters
- Built-In Media: Switch
- Item Highlight: Decoding with 3 modes: momentary, toggle, interlock. Compatible with Arduino, ESP32 & Raspberry Pi for DIY wireless control.
- Controller Type: Button Control
- Mfr Part Number: RX480E-4/TX118S-4
- Compatible Devices: Fan, Garage Door, Heater, Lamp, Thermostat
- Additional Features: No Programming Required
- Connectivity Technology: Radio Frequency
- Maximum Number of Supported Devices: 15
🚀 Fast & Professional Shipping ▼ Most orders are dispatched within 24 hours. Every item is professionally packed using protective materials. ✅ 30-Day Hassle-Free Returns ▼ We offer a 30-Day Hassle-Free Return Policy. Simply return the item in its original condition for a full refund. ETLIK STORE © 2026
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.