Python 7701P 2 Way LCD Replacement Remote Viper 7701V For Python 950 and 990

Discontinued Clifford 7701X replacement: Genuine NEW Viper 7701V Responder SST 2-Way LCD remote, UPC 093207025495, up to 1-mile advertised range, for select Viper, Clifford Matrix and Python systems. Includes AAA battery; belt clip not included.HOMEABOUT USresponseCONTACTVIEW ALL ITEMSGenuine Viper Responder SST RemotePYTHON 7701P REPLACEMENTGenuine Viper 7701V 2-Way LCD Replacement RemoteUp to 1-Mile RangeGENUINE VIPER2-WAY LCDRESPONDER SSTBRAND NEW

Replacing your discontinued Python 7701P remote or adding a transmitter to a compatible Python 950 or 990 system? This listing supplies one genuine new Viper 7701V Responder SST 2-way LCD remote from the original manufacturer.

The genuine Viper 7701V replaces the discontinued Python 7701P in compatible systems and belongs to the original SST long-range remote family, advertised with up to 1-mile range under ideal conditions. Actual operating range varies with terrain, buildings, interference and installation.

7701 SERIES — DIRECTED REMOTE FAMILYThe discontinued Python 7701P (and Clifford 7701X) are replaced by the genuine Viper 7701V for the compatible systems shown below. This is NOT a replacement for any 479-series remote.VIPER7701VPYTHON7701P — DISCONTINUEDCLIFFORD7701X

Exactly what ships: One Viper 7701V remote. Discontinued Python 7701P and Clifford 7701X are shown as replacement references only; neither is included.

Genuine Viper 7701V — New

This is an original Viper Responder SST 2-way LCD transmitter, not a used remote or generic reproduction.

One AAA battery included. Belt clip is NOT included.

UPC: 093207025495

PYTHON 7701P REPLACEMENT — VIPER 7701V PRODUCT INFORMATION7701VActual Viper Remote Shipped2-WAY LCDResponder SSTUP TO 1 MILEAdvertised Ideal-Condition Range093207025495UPCSTOP — NOT COMPATIBLE WITH 479V, 479X OR 479P

The Viper 7701V will NOT replace the Viper 479V, Clifford 479X, or Python 479P. The discontinued 479-series remotes look very similar, but the 7701V has a longer antenna and uses a different incompatible remote system. The 479V / 479X / 479P remotes are discontinued and no longer available. Do not purchase this 7701V for a 479-series remote replacement.

Compatible Security & Remote Start Systems

System models identified in the original Access 1 listing:

VIPER

• 5500 / 4301V
• 5900 / 5301V

PYTHON

• 950 / 4301P
• 990 / 5301P

CLIFFORD MATRIX

• 20.5X / 4301X
• 50.5X / 5301X

Viper antenna: 6701T (5500 and 5900 systems). Discontinued 1-way companion remotes: Viper 7642V, Clifford 7642X and Python 7642P. All three 7642-series remotes are discontinued and no longer available. The Viper 7701V 2-way LCD remote is the remaining replacement solution for the compatible systems listed above. This listing includes one 7701V remote only.

Important Compatibility InformationThis remote must be programmed to a compatible, functioning Directed Electronics control system already installed in the vehicle.

• If unsure, confirm your installed system model or contact us through before ordering.

Why Can Viper, Python and Clifford Remotes Work With Related Systems?

Viper, Python and Clifford are brands in the Directed Electronics family. Certain generations share underlying transmitter and receiver technology, so equivalent remote models may be compatible across brands when used with the correct system. The 7701V (Viper), 7701P (Python) and 7701X (Clifford) are related 2-way models. The corresponding 7642V (Viper), 7642P (Python) and 7642X (Clifford) were 1-way companion remotes; all 7642-series remotes are discontinued and unavailable. The genuine 7701V is the available replacement for the listed compatible systems; brand alone does not determine compatibility.

Always verify the actual installed control module and receiver before ordering.

Python 7701P Replacement — Viper 7701V Programming Instructions

Original Directed Electronics Learn Routine — 4-Button Responder SST

Follow these instructions to program the 7701V to a compatible, working system. Locate the vehicle\'s Valet/Program switch before starting. The switch must be connected to the BLUE port on the system\'s control unit.

STANDARD CONFIGURATION — CHANNEL 1 1Door. Open a vehicle door and leave it open. 2Key. Turn the ignition key to the ON position. Do not start the engine. 3Choose. Within 5 seconds, press and release the Valet/Program switch once to select Channel 1 (Auto-Learn Standard Configuration). 4Hold. Press the Valet/Program switch one more time and continue holding it. The LED will flash once, and the siren will chirp once if connected. Do not release the switch. 5Transmit. While still holding the Valet/Program switch, press the button on the 7701V remote that you wish to assign. The unit will chirp (if connected) to confirm the remote was learned. 6Release. Release the Valet/Program switch and remove the ignition key. Channel reference: Channel 1 = Auto-Learn Standard Configuration. Channel 11 = Delete All Transmitters. Do not select Channel 11 unless you deliberately want to erase all programmed remotes. STANDARD REMOTE BUTTON FUNCTIONS

LOCK: Arms and locks the system.
UNLOCK: Disarms and unlocks the system.
AUX: Operates Channel 2.
SIREN / STAR: Panic function; remote-start operation may vary by system and configuration.
LOCK + UNLOCK / STAR together: Operates Channel 3 where supported.
P button on back: Opens the transmitter programming menu; refer to the system owner\'s guide for details.

Important: These instructions are based on the original 7701V replacement-transmitter packaging. They do not apply to the visually similar but incompatible 479V, 479X, or 479P series. If you are unsure which system is installed, contact us through before attempting programming.

Why Buy From Access 1 Alarm & Audio?Viper Authorized Diamond Dealer • Over 20 Years of Mobile Electronics Experience

Access 1 Alarm & Audio is a brick-and-mortar mobile electronics retailer serving Cleveland and Northeast Ohio.

We specialize in remote start, vehicle security, replacement remotes, car audio and mobile electronics.

AUTHORIZED DIAMOND DEALERGenuine Directed productsREAL RETAIL STORECleveland, Ohio20+ YEARS EXPERIENCEMobile electronics specialistsTOP RATED PLUSEstablished sellerShipping

• Orders ship by the following business day after cleared payment, excluding weekends and postal holidays.
• Standard domestic shipping is via USPS Ground Advantage. USPS Priority Mail upgrade is $14.99.
• Shipping to Alaska, Hawaii, APO and FPO addresses is $8.00 total.
• International orders ship directly from Access 1 Alarm & Audio using the international shipping service selected at checkout, not International Shipping. Availability and charges depend on the destination and checkout options.
• International buyers are responsible for applicable import duties, taxes, and customs fees. Please confirm your shipping address before returns for domestic and international orders, subject to the listing\'s return terms.
• For standard buyer-remorse returns, buyer pays return shipping. Money Back Guarantee rights for incorrect, damaged, or defective items remain applicable.
• Items must be returned in the condition received with original manufacturer packaging, manuals, and accessories where applicable. Do not use the retail package as the shipping carton.
• For eligible returns, refunds may exclude original outbound shipping where permitted by policy. Contact us through for assistance.

QUESTIONS BEFORE ORDERING?

• This listing replaces the discontinued Python 7701P with one genuine Viper 7701V 2-way LCD remote. No Python 7701P or Clifford 7701X is supplied.
• If you are uncertain about the remote currently installed with your system, please contact Access 1 Alarm & Audio through before ordering.
• If possible, include the model number of your installed Viper, Python or Clifford system so we can help verify compatibility.

CONTACT US | ABOUT US | VIEW ALL ITEMS

Copyright 2007 - 2026 Access 1 Alarm & Audio