Python 7111P 411 413 4x03 Keyless Remote Car Starter Key Control FOB EZSDEI471H

Stock #:591C This item is pre-owned – it will work like newonce programmed to your vehicle

One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controllerreplacement

Functions at 100% Tested & Guaranteed

Python / Clifford/ DEI/ Directed Electronics / Avital / Viper / Automate / Auto-Mate

1-button remote control

slim One-button remote offers DEI\'s exclusive Super Code Hopping protection against code grabbers, with 2/66 (18 quintillion) rolling codes. With green led.

FCC ID: EZSDE1471H

Interchangeable FCC IDs:

EZSDEI7111L

EZSDEI471H

Interchangeable part #s:

Part #: 7111P / 7111L / 7111A / 7111P / 7111R / 4115L / 4115V / 1-Way Remote (7111V)

Frequency: 433 - 434 MHz

LED color: Green

1 button

Battery: (1) CR 2032

Compatible with the following systems:

AVITAL 4111

AVITAL 4113

AVITAL 4115

Avital 4113

Automate AM6.2

Viper 4115

Python 411

Python 413

Automate 4101A

Automate 4113A

Programming Instructions:

1) Turn the ignition to the ON position.

2) Within 10 seconds, press & release the program switch the number of times corresponding to the desired channel listed next. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the program switch.

3) Channels:

- Channel 1: Auto Learn Standard Configuration (default)

- Channel 2: Delete remotes: This feature erases all remotes from the memory of the security system. This is useful in cases when a customer’s remote is lost or stolen. Note: This does not reset the programmed features of the security system or reset the Virtual Tach setting.

- Channel 3: Reset Features: This resets features all of the security system to the factory default settings. Note: This feature does not delete the remotes from the security system or reset the Virtual Tach setting.

- Channel 4: Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next remote start sequence the unit begins virtual tach initialization. Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach setting.

4) While Holding the Program switch, press the button on the transmitter that you would like to control the selected receiver channel.

5) Once the code is learned, the Program switch can be released.

You can advance from programming one channel to another by releasing the Program switch and tapping it to advance steps and then holding it. For instance: You have programmed Channel One and you want to program Channel Two. Release the Program switch. Press it one time and release it to advance from Channel One to Channel Two. Now, press and hold the Program switch. The LED will flash two times. As before, do not release it.

If you want to program Channel Three after programming Channel One, release the Program switch, press it twice and release it to advance to Channel Three. Then press it once more and hold it. The LED will flash three times to confirm it is ready to receive the code from the transmitter.

6) Exiting programming mode:

- Ignition is turned off.

- Program switch is pressed too many times.

- More than 25 seconds elapses between programming steps.

Payment: We accept payment via PayPal or CreditCard. Please contact us via messages for any questions concerningpayments. Payment is expected within 5 days.

PA SALES TAX: As per the State of PA Franchise Board wemust collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails.We only read/respond to MESSAGES. Messages & Best Offers are checkedthroughout the day & we typically respond 7 days a week. Please contact uswith questions via messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:

1. We have a 30 dayreturn policy.

2. All returns forreplacements and refund need an RMA #.

3. Please contact usbefore returning items so we can give you theRMA # and the proper returnaddress.

4. No refunds / replacementswill be granted without an RMA#

Weensure proper working condition of all previously used or new remotes through aserious of tests performed with the Santronics Testing device. Each button istested for functionality prior to shipment and then logged.

Please Note:Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection toverify originality of remote sent prior to refund or replacement.

Does this keyless remote entrycome with a battery?

Yes. It will have a working battery installed.

Battery Condition:

A. All remotes sold onKeyless4u include working batteries.

B. Installed batteriesare not tested for battery life- theyare simply working.

Some are new and some are used.

Your vehicle will be installedwith one of the following keyless entry systems:

a.Standard Keyless Remote Packages: Installed at time of manufacture.

b. Optional Keyless Remote Packages:Installed by a dealer.

c.Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audioshop.

d. No remote keyless entry system at all.

The above information can changewhich remote you need
for your installed remote keyless system.

Powered by
.