Pyle PTA1 Stereo Power Amplifier 2x15W - Tested

Pyle PTA1 2-Channel Stereo Power Amplifier. Tested working!
---
The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores and at home --the perfect solution for paging systems anywhere. Get the power you need with 2 x 15 Watt to handle all your audio needs!

Switchable Mixing (Karaoke) Mode

When set to \'mixing\' the signals from AUX1, AUX2, CD & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to \'pager\' the signal from AUX1, AUX2 & CD will be attenuated by -10dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

L/R Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110V/60Hz (the standard in USA and Canada) to 220V/50Hz (for European operation). Please make sure the switch is in the proper position before operating.

1/4\" PHONE Jack

Accepts headphones with 1/4\" plugs.

1/4\" MIC Input Jack

Accepts microphones with 1/4\" plugs.

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20mm fuse -not included)

Additional Features

Harmonic Distortion: 0.3%

2 x 15 Watt RMS at 4-Ohm

Blue LED Output Level Display

Frequency Respone: 30Hz-20kHz

Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20mm)

Power Requirement: 120V AC 60Hz/230V AC 50Hz

Tone Controls: Bass & Treble: +/-10dB (100Hz/10kHz)

Dimensions: 8.27\" W x 2.72\" D x 5.39\" H (190 x 70 x 137mm)

Headphone Output

2 x 15 Watt MAX Power

115/230 Voltage Selector

AUX/CD Input and Selector

Push Type Speaker Outputs

Total Harmonic Distortion: 0.3%

Master Volume and Balance Controls

Power On/Off Switch and LED Indicator

MIC 1/4\'\' Jack Input and Volume Control

Switchable Mic Pager and Mixing (Karaoke) Modes

Dimensions：7.48\'\'W x 2.76\'\'H x 5.39\'\'D

Sold as: Unit

Weight: 3.37 lbs.