Programmed 2013-2014 Enclave Fuel Pump Module 20964304 Restore Your Vehicle’s Performance and Reliability
Is your 2013-2014 Buick Enclave or other GM vehicle experiencing frustrating issues like stalling, hesitation during acceleration, an extended crank time, or a dreaded no-start condition? Before you consider replacing the entire fuel pump—a costly and labor-intensive job—the culprit is often this small but critical component: the Fuel Pump Control Module (FPCM), also known as a Fuel System Control Module (FSCM). In my 20+ years of diagnostics, I’ve seen countless vehicles where a failing FPCM was the root cause of fuel delivery problems, often tricking owners into more expensive repairs.
This module, part number 20964304, is the brain behind your fuel pump. It precisely regulates the voltage sent to the pump, ensuring your engine gets the exact amount of fuel it needs under all conditions. When it fails, fuel pressure becomes erratic, leading to the symptoms that have likely brought you here. We solve the biggest headache of this repair by pre-programming the module to your vehicle’s specific VIN before it ships. This means no expensive trip to the dealership for programming—it’s a true plug-and-play solution.
From the Diagnostic Bay: The Intermittent Stall Case
A customer brought in a 2013 GMC Acadia (a sister vehicle to the Enclave) with a problem that was driving them crazy: it would randomly stall at stoplights, but then start right back up. They’d already been told they needed a new fuel pump. I scanned the vehicle and found a stored DTC U0109 – Lost Communication With Fuel Pump Control Module. Instead of throwing parts at it, I checked the FPCM, which is located on the rear crossmember on these SUVs. It was heavily corroded from road salt and moisture. A new, properly programmed FPCM fixed the issue completely, saving the customer hundreds of dollars and the hassle of dropping the fuel tank. This is a story I’ve seen play out dozens of times on these GM platforms.
Common Signs of a Failing FPCM
- ✔ Check Engine Light with codes like P069E, P0230, or U0109.
- ✔ Engine stalls unexpectedly, especially at idle or low speeds.
- ✔ Vehicle hesitates or stumbles during acceleration.
- ✔ Difficulty starting the engine (long crank times).
- ✔ Complete no-start condition where the engine cranks but won’t fire.
- ✔ A noticeable loss of engine power.
A Straightforward Guide to Installation
Replacing the FPCM on your 2013-2014 Enclave is a manageable job for a DIYer. The module is typically mounted on the vehicle’s rear crossmember, making it accessible without removing the fuel tank.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the Module: Safely raise the rear of the vehicle and secure it with jack stands. Find the FPCM mounted to the frame or rear crossmember, usually near the spare tire.
- Disconnect and Remove: Carefully unplug the electrical connectors. Be gentle with the locking tabs, as they can become brittle. Then, unbolt the module from its mounting bracket. Note the orientation of the old part.
- Install the New Module: Bolt the new, pre-programmed FPCM into place. Reconnect the electrical connectors, ensuring they click securely into place.
- Final Steps: Reconnect the negative battery terminal. Turn the key to the ‘On’ position for 10-15 seconds (without starting) to allow the fuel system to prime. Start the vehicle and check for proper operation.
Guaranteed Fitment for Your GM Vehicle
This module is a direct replacement for part numbers 20964304 and 20964305 and is verified to fit the following vehicles. Please check your specific options.
- Buick Enclave: 2013-2014 (rear crossmember)
- GMC Acadia: 2013-2014 (rear crossmember)
- Chevrolet Traverse: 2013-2014 (rear crossmember)
- Cadillac CTS: 2013-2015 (rear compartment, various trims)
- Chevrolet Impala: 2013-2016 (Limited models, RH rear quarter panel)
- Cadillac Escalade / ESV / EXT: 2013-2014 (LH frame rail, w/o integrated trailer brake)
- Chevrolet Avalanche 1500: 2013 (LH frame rail, w/o integrated trailer brake)
- Chevrolet Silverado 1500: 2013 (LH frame rail, w/o integrated trailer brake)
- GMC Sierra 1500 / Denali 1500: 2013 (LH frame rail, w/o integrated trailer brake)
- Chevrolet Suburban 1500: 2013-2014 (LH frame rail, w/o integrated trailer brake)
- GMC Yukon / XL 1500: 2013-2014 (LH frame rail, w/o integrated trailer brake)
- Chevrolet Tahoe: 2013-2014 (LH frame rail, w/o integrated trailer brake)
- Chevrolet Express 1500 Van: 2013-2014 (LH frame rail)
- GMC Savana 1500 Van: 2013-2014 (LH frame rail)
Frequently Asked QuestionsDo I need to program this module?
No! That’s the best part. We program the module to your vehicle’s VIN before we ship it. It arrives ready for installation, saving you a trip to the dealer and expensive programming fees.
How do I provide my VIN?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the part until we receive your VIN for programming.
Where is the FPCM located on a 2014 Buick Enclave?
On the 2013-2014 Enclave, Traverse, and Acadia, the Fuel Pump Control Module is typically mounted on the rear crossmember, which is located in front of the spare tire area underneath the vehicle.
Is this part compatible with part number 20964305?
Yes, this module is a direct, compatible replacement for both 20964304 and 20964305. We will load it with the latest GM software for your specific vehicle.
What happens if I install it without programming?
An unprogrammed FPCM will not communicate correctly with your vehicle’s Powertrain Control Module (PCM). This will result in a no-start condition and set communication error codes. Our pre-programming service eliminates this problem entirely.
Product Details
Category: Fuel Pump Control Module (FPCM)
Item ID:
To program your module, we require your full 17-digit VIN. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it.
Shipping
- Processing Time:
Reliably shipped within 2-3 business days.
Warranty
Enjoy peace of mind with a one-year replacement warranty on this part, effective from the date you receive it. Labor costs are not covered.
If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience.
Return Address:
Highway71autoparts
9131 Highway 71 NE
Spicer, MN, 56288
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.