The Profile Push stem is Mark Mulville\'s signature top load stem CNC machined in the USA with built in rise to get your bars a little higher. Excessive machining help reduce weight while chamfered edges and a concaved backside clean up the look.
Reach: 48mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16\"x18tpi (x4)
Pinch Bolts: 5/16\"x18tpi (x2)
Weight: 9.9 oz
Reach: 53mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16\"x18tpi (x4)
Pinch Bolts: 5/16\"x18tpi (x2)
Weight: 10.4 oz
Reach: 58mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16\"x18tpi (x4)
Pinch Bolts: 5/16\"x18tpi (x2)
Weight: 11 oz
Reach: 63mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16\"x18tpi (x4)
Pinch Bolts: 5/16\"x18tpi (x2)
Weight: 11.6 oz
About Us | View Store
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.