Presonus StudioChannel Studio Channel Recording Vacuum Tube Mic Preamp Strip Description Our SKU: 15126946 Item Brand: PreSonus Item MPN: STUDIOCHANNEL BRAND NEW PRESONUS STUDIO CHANNEL RECORDING TUBE MIC PRE-AMP STRIP WITH COMPRESSOR AND EQUALIZER BUILT INCondition: BRAND NEW IN ORIGINAL PACKAGINGFeatures Summary:Class A vacuum tube microphone / instrument preamplifierTube gain and tube driveVariable VCA compressor (threshold, ratio, attack, release, make up gain, auto, soft)Three-band parametric EQPrecision analog VU meter for gain reduction and outputEQ Pre/Post compressor switch80Hz high pass filter20dB padPhase invertRugged metal chassisHigh headroomUltra low noise designDescription:The Studio Channel is a professional channel strip combining Class A tube preamplifier, VCA-based compressor and three-band parametric equalizer perfect for the professional and project studio. Great for all types of microphones, instruments, keyboards and synths, the Studio Channel has the sonic power and flexibility to achieve any tone you can dream of – luscious in your face vocals, crystal clear acoustic guitars, fat solid bass guitar, dynamic acoustic piano, cracking snare, punchy bass, huge MPC tracks and more.Enhance your signal pathThe Studio Channel noticeably outperforms preamplifiers that are built-in to most recording interfaces and affordable mixers. Add a VCA-based compressor and studio-grade equalizer to the class A tube preamp and you get not only big fat tube tonality but also complete control of your tone and sounds. Since much of the recording process is accomplished one track at a time, you need a signal path that can deliver a variety of high quality tones and sounds, which is why the Studio Channel is the perfect tool for any studio.Class A Tube PreamplifierThe Studio Channel has everything needed to deliver big tone. The preamplifier stage of the Studio Channel is based on the award winning BlueTube preamplifier with a high output 12AX7 vacuum tube operating on voltages double than all other preamplifiers in its class delivering high headroom and big tone. Dual control Gain and Tube Drive enables a wide range of sounds from transparent and clear to edgy and overdriven.Full Featured VCA CompressorThe compressor in the Studio Channel is a fully variable ultra-fast and smooth VCA-based circuit with all of the controls needed for a wide range of compression settings: ratio, threshold, attack, release and gain make up. The VCA-based compressor is known for musicality as well as ultra fast attack with the ability to tame the fastest transients. From slap bass, to snare drum, to vocals, the Studio Channel’s compressor stage allows you to record as hot as needed without clipping giving you total dynamic control.Three Band Parametric EQThe equalizer in the Studio Channel is like a Swiss Army pocket knife, with the ability to carve out unwanted frequencies as well as tailor your tone to enhance your sound. The custom-designed amplifiers in the EQ deliver sweet-sounding gain/cut for ultra smooth highs, deep solid lows and clear midrange. The mid-band of the EQ section has variable Q for controlling the width around the center point of the selected frequency. High and low frequency bands give you the option for selecting peak/dip or shelving frequencies.Technical Specifications:Channels OneDynamic Range >115 dBFrequency Response 10 Hz to 50 kHzInternal Operating Level 0 dBu = 0 dBMicrophone PreampGain -6 dB to +66 dB (+/- 10dB trim on line input)Noise Floor -96 dBuEIN -126 dBTHD + Noise (0% Tube Drive) < 0.050%THD + Noise (100% Tube Drive) < 0.10%Microphone Input Connector XLRMicrophone Input Impedance 1.3 kInstrument Input Connector ¼” TSInstrument Input Impedance 1 MLine Input Connector ¼” TRSLine Input Impedance 10 kPhantom Power (switchable) +48VPad (switchable) 0 dB / -20dBPhase (switchable) 0°, 180°Hi-pass filter (switchable) -3 dB at 80 HzCompressorThreshold (variable) -40 dBu to +2- dBuRatio (variable) 1-10 (1:1 to 2:1)Attack (variable) 0.1 to 200 msRelease (variable) 0.05 ms to 3 SGain Make Up -10 dB to +10 dBMetering Analog VU (Gain Reduction / Output)EqualizerLF Band Controls:Frequency Variable from 40 Hz to 500 kHzGain Variable between ±10 dBQ 0.7 (on ‘peak’ setting)MF Band Controls:Frequency Variable from 200 Hz to 3 kHzGain Variable from -10 dB to +10 dBQ Variable from 0.7 to 2.5HF Band Controls:Frequency Variable from 2 kHz to 20 kHzGain Variable between ±10 dBQ 0.7 (on ‘peak’ setting)MasterOutput Fader -80 dB to +10 dBOutput Connectors XLR Balanced and ¼” TRS Balanced/UnbalancedOutput Impedance 51 Metering (Output level) Analog VU (-20 dBu to +6 dBu)Metering (Gain Reduction) Analog VU -20 dB to 0 dBOutput Headroom +22 dBuPower SupplyType LinearInput 16 VAC / 1000mAPower Requirements (Continuous) 16WTransformer External (country specific)PhysicalSize 1U RackDimensions 19” x 1.75” x 5.5”Weight 5 lbs
Please contact us with any questions regarding a past or future purchase. Check out our store for more great products and deals.
Warranty
Our inventory is purchased from various manufacturers, retailers, and third-party sources. We do not represent or make any claim regarding manufacturer warranties. We make every possible attempt to accurately describe the inventory we sell and stand behind it.
We offer a no-questions-asked 30-day return policy on everything we sell, provided the item is returned in the same condition it was sold in. If you have any issue with your purchase, please contact us so we can help make it right.
Shipping
All items are carefully packed and properly protected for shipment. We use several carriers and select the most practical option based on the item, destination, handling time, and estimated transit time.
Please make every attempt to verify that the part or product being purchased is correct for your application before ordering.
If there is shipping damage, the item is not as expected, or you need to return the product for any reason, please contact us.
At this time, we do not offer international shipping.
About 8TEN Industries
Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility in Cass City, Michigan allows us to turn difficult inventory problems for manufacturers into great deals for our customers.
More Items Store Contact Follow Us 8TEN Industries
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.