|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
|
USERBARS.org | Free Forum Userbars
| On eBay now |
Power Custom/Grandmaster® Base Pin Keith #5 Ruger® Single Action 2.875" Blued
$32.99
Power Custom\'s Keith #5 Base Pin is designed for small frame revolvers such as the Ruger® Large Frame Vaquero. The base pin is a handsomely finished hardened steel with a ground to .2495\" diameter. Locking pins have an allen set screw in the head to hold the pin in place against recoil. Installation instructions are included and on most guns these pins drop right in. Notes: - Ruger® (3 screw) Old Models use the same base pins for all corresponding frame sizes. You can use the New Blackhawk (longest) and shorten to length. The spring loaded plunger is not needed. The last number is the maximum length measured from under the head to end the base pin, not the plunger.
- The current production run of the stainless pin has a bead-blasted finish, ready for polishing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
|
|
|
Power Custom/Grandmaster® Base Pin Keith #5 Ruger® Single Action 2.875" Blued$32.99
Power Custom/Grandmaster® Base Pin Keith #5 Ruger® Single Action 2.875" S/S$32.99
Power Custom/Grandmaster® Base Pin Keith #5 Ruger® Single Action 2.75" Blue Q105$32.99
Power Custom/Grandmaster® Base Pin Knurled Lock Ruger® Single Action 2.875" Blue$32.99
Power Custom®/Grandmaster® Trigger Shims Ruger Single Action 10PK$16.49
Power Custom/Grandmaster® Base Pin Knurled Lock Ruger® Single Action 2.75" Blue$31.34
Power Custom®/Grandmaster® Hammer Shims Ruger Single Action 10PK$17.09
Power Custom/Grandmaster® Base Pin Knurled Lock Ruger® Single Action 2.875" S/S$32.99
