Portable Auto Digital Brake Fluid Liquid Tester Pen Oil Testing For DOT3 DOT4 US
Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.
1. How Dangerous of a bad quality Brake Fluid ?
1) The inferior brake fluid causes the brake failure easily,thereby lead to a accident
2) The Brake fluid is related to the life of Brade pads, if doesn\'t take it seriously, the life of brake pads is worried.Good or Bad Distinguish accurately
Our Brake Fluid tester designs 4 level digital led indicator that can provide the accurate water content for you.Functions:
1.check the car brake oil quality
2.5 LED lights display the percentage of moisture content in brake fluid,how the test results more accurate
3.Press the button for power on, green LED will light up.
4.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
5.Testing for DOT 3, DOT4, DOT5 brake fluid
6.Auto power off, Supports 1 LR03 AAA batteries (Battery not included)
Accurate To 1% For TEST
The Metrics is accurate to 1%, it can help you to know the situation of Brake Fkuid more clearly
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
How to use Brake fluid tester ?
Step 1 : Open car\'s front cover
Step 2 : Find the brake Oil tank mouth
Step 3 :Dip test probes and read the Led lights
Step 4: Recover the car\'s front cover
Package List:
1 x a brake fluid tester (Battery not included)
To Check Fluid Quality:
Press the button for power on, green LED will light up.
Insert the tester into reservoir for a second, then the results will be indicated correctly by LEDs.
Auto power off .
Indications:
Green: Battery OK, i.e.: No Water Contained in the Brake Fluid
Yellow: Less than 1% of Water Content in Brake Fluid
Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid
Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid;
The Brake Fluid Should be Changed
Yellow/Yellow/Red/Red: at least 4% of Water Content in Brake Fluid;
The Brake Fluid Must be Changed Urgently, Extreme Danger .
Notice
* Please replace battery if the Green LED does not light up after you press button power.
* Wash the test probe with tap water after use.
* If you skin or clothing contacted with fluid, please use the water to wash.
* Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!
* The monitors differ from one to another, the picture is only for reference, please make the object as the standard.
BrandMUCARTypeInjector TestercolorblackVehicle TypePassenger VehicleManufacturer Part NumberBrake Fluid TesterSupported Systemobd2, EPBFeatures 1check the car\'s quality oil brakesFeatures 2Testing POINT 3,DOT4,DOT5 brake fluidOBD InterfaceOBDII, EOBD, OBD, CANUnit Quantity1Features 4With 5 LED lightFunction 1Automotive ToolsFunction 2Auto Automotive Test ToolApplicable RegionsNo LimitationMaterialPlasticNotebattery and user manual not includedMPNn/a
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.