Pop Rivets All Aluminum Dome Head Open End Blind Rivets All Sizes & Qtys

Aluminum Open-End Dome Head Blind Pop Rivets

All-Aluminum • 1/8\" to 1/4\" Diameters • Grips to 1\" • Bulk Quantities

At a Glance All-aluminum open-end dome head pop rivets: 29 sizes in 1/8\", 5/32\", 3/16\" and 1/4\" diameters, packs of 5 to 2,500.

• Aluminum body and aluminum mandrel
• Size = diameter x maximum grip (total material thickness)
• Grip ranges from .032\" up to 1.000\"
• Installs with any standard pop rivet gun
• Choose size and pack size above

Description

Fastenio all-aluminum open-end blind rivets (pop rivets) with a standard dome head. A blind rivet installs from one side of the work, so it\'s the fastener of choice for permanent joints where only one side is accessible: sheet metal, ductwork, gutters, trailers and signage.

Both the rivet body (5052 aluminum) and the mandrel are aluminum, so the joint stays light, corrosion-resistant and free of galvanic mismatch. This listing covers 29 sizes in 1/8\", 5/32\", 3/16\" and 1/4\" diameters, for material thicknesses from .032\" up to 1.000\", in pack quantities from 5 (sample) up to 2,500 (bulk).

When to Use a Standard Dome Head

• Most sheet and panel joints — the low, rounded head gives a clean finished look on the visible side.
• Rigid material, correctly sized holes — the standard head is lower-profile than a large flange and is all most joints need.
• Thin, soft or oversized-hole material — choose our Large Flange pop rivets instead (cross-linked below); the wider head resists pull-through.
• Open end — the mandrel breaks off and leaves an open core, so the joint is not sealed through the center.

Riveting Action

Insert the rivet through pre-drilled, aligned holes, then pull the mandrel with a hand or pneumatic rivet tool. As the mandrel pulls, the rivet body forms a clinched head on the blind side; the mandrel snaps off once full installation force is reached, leaving the dome head seated on the visible side.

Material

Body: 5052 Aluminum — excellent corrosion resistance in outdoor and marine environments.

Mandrel: Aluminum. No mixed-metal galvanic concern at the fastened joint.

Finish: Plain (uncoated).

How to Order

Select your variation by Size and Pack Quantity. Each size reads diameter x maximum grip:

• Diameter — match the diameter of your pre-drilled hole (typically +0.003\" to +0.005\" over the rivet body for clean clearance).
• Grip — add up the thickness of every layer being joined, then choose the size whose grip range (table below) covers that total.
• Pack Quantity — 5 and 10 are sample/repair packs. 25–100 cover small projects. 250–2,500 are production-volume bulk.

Built for repeat buyers. Clean listings, accurate item specifics, fast US shipping, and responsive support before and after the sale.

Need it faster? UPS 2nd Day Air and Next Day Air are available by request — message us with your ZIP code before purchase for a quote.

Need a larger quantity? Volume pricing is available beyond the listed pack sizes — message us with your target qty and we\'ll quote.

Available Sizes & Grip Ranges DiameterSize optionGrip range (total material thickness) 1/8\"1/8\" x 1/16\".032\"–.062\" 1/8\"1/8\" x 1/8\".063\"–.125\" 1/8\"1/8\" x 3/16\".126\"–.187\" 1/8\"1/8\" x 1/4\".188\"–.250\" 1/8\"1/8\" x 5/16\".251\"–.312\" 1/8\"1/8\" x 3/8\".313\"–.375\" 1/8\"1/8\" x 1/2\".376\"–.500\" 1/8\"1/8\" x 5/8\".501\"–.625\" 5/32\"5/32\" x 1/8\".063\"–.125\" 5/32\"5/32\" x 3/16\".126\"–.187\" 5/32\"5/32\" x 1/4\".188\"–.250\" 5/32\"5/32\" x 3/8\".251\"–.375\" 5/32\"5/32\" x 1/2\".376\"–.500\" 3/16\"3/16\" x 1/8\".063\"–.125\" 3/16\"3/16\" x 3/16\".126\"–.187\" 3/16\"3/16\" x 1/4\".188\"–.250\" 3/16\"3/16\" x 3/8\".251\"–.375\" 3/16\"3/16\" x 1/2\".376\"–.500\" 3/16\"3/16\" x 5/8\".501\"–.625\" 3/16\"3/16\" x 3/4\".626\"–.750\" 3/16\"3/16\" x 7/8\".751\"–.875\" 3/16\"3/16\" x 1\".876\"–1.000\" 1/4\"1/4\" x 1/4\".126\"–.250\" 1/4\"1/4\" x 3/8\".251\"–.375\" 1/4\"1/4\" x 1/2\".376\"–.500\" 1/4\"1/4\" x 5/8\".501\"–.625\" 1/4\"1/4\" x 3/4\".626\"–.750\" 1/4\"1/4\" x 7/8\".751\"–.875\" 1/4\"1/4\" x 1\".876\"–1.000\"

Applications

• HVAC — ductwork and sheet metal.
• Automotive & marine — trim, panels and repairs.
• Gutters & roofing — gutters, downspouts and flashing.
• Signs & displays — signage, displays and fixtures.
• Enclosures — electronics and equipment enclosures.
• Construction & fabrication — general light fabrication.

Notes

• Hole size: drill +0.003\" to +0.005\" over the rivet body diameter for proper clearance.
• Galvanic compatibility: aluminum body + aluminum mandrel is ideal for aluminum or non-conductive material. For stainless steel material in wet environments, consider stainless rivets.
• Tools: installs with any standard hand or pneumatic pop rivet tool.

Related Fastenio Products

Large Flange Pop Rivets

Wider head for thin or soft material.

View →

#12 Self-Drilling Tek

No pre-drilling needed — HVAC/sheet metal.

View →

#8 x 1\" SS Sheet Metal Screws

Removable alternative for sheet metal.

View → Visit the Fastenio Store for More Fasteners → FASTENIO – Industrial-grade fasteners engineered for strength, precision, and lasting performance.