Pool & Spa Light Junction Box 2 Light & 4 Light Options | Watertight Pool Light Cord Splice Enclosure
A protected junction point for connecting the supply conductors to underwater pool or spa light cords. Choose the 2 Light or 4 Light configuration from the variation menu.
Pick Your Size
The 2 Light model supports up to two lights with three total entry locations. The 4 Light model supports up to four lights with five total entry locations. Both configurations provide one supply entry plus one individual entry for each pool or spa light.
2 Light – SW-70-217: Up to 2 Lights | 3 Entries | Approx. 7.25 x 3 x 4 in
4 Light – SW-70-417: Up to 4 Lights | 5 Entries | Approx. 8.75 x 5 x 4.63 in
One Box. Every Light Cord.
Designed as a protected watertight splice point between the supply conductors and the cords of your underwater pool or spa lights. Each box provides one supply entry plus a separate entry for every light.
Drop-In Replacement
The 2 Light SW-70-217 replaces the Intermatic PJB2175, while the 4 Light SW-70-417 replaces the Intermatic PJB4175 in existing installations. Designed for use with compatible Pentair, Hayward and Jandy 120V and low-voltage underwater lights.
Built for Safe Splicing
An internal ground bar terminates the supply grounding conductor and fixture grounding conductors. An external bonding lug provides connection to the equipotential bonding grid where required. A gasket-sealed cover and individual strain-relief cord entries help keep water out.
- Internal ground bar
- External bonding lug
- Gasket-sealed cover
- Individual strain-relief entries
- Copper conductors only
- For NEC Article 680 pool and spa installations
- Reducer bushings and entry plugs included
Accepts Standard Pool Light Cords
Compatible with common pool light cord sizes and designed to accept 1/2 in through 1 in nonmetallic conduit using the supplied reducer bushings. Entry plugs are included to permanently seal unused openings.
#16/3: Extra Hard Usage
#14/3: Extra Hard Usage
#12/3: Hard Usage
#10/2: Hard Usage
Where to Mount It
Mount the junction box rigidly to a wall, post or stake. Position it at least 4 ft from the inside wall of the pool or spa, at least 8 in above the maximum water level, and at least 4 in above the deck or finished grade. Never allow the box to hang from conduit or cord.
Choose Your Junction Box SW-70-217 – 2 Light
Up to 2 Lights
3 Total Entries
1 Supply Entry + 2 Light Entries
Approx. 7.25 x 3 x 4 in
Replaces Intermatic PJB2175
SW-70-417 – 4 Light
Up to 4 Lights
5 Total Entries
1 Supply Entry + 4 Light Entries
Approx. 8.75 x 5 x 4.63 in
Replaces Intermatic PJB4175
Please select the correct 2 Light or 4 Light variation before ordering.
Package Includes
1 × Pool & Spa Light Junction Box in Selected Size
Reducer bushings and entry plugs included as shown.
Important: Select the correct junction box capacity before ordering. Installation must comply with applicable pool and spa electrical requirements. Copper conductors only. Installation should be performed by a qualified person in accordance with applicable electrical codes.
Manufacturer names and part numbers referenced for compatibility are used for identification purposes only.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.