BANFLUXION®Pneumatic Soap Shaping Trimmer Adjustable Trimming Machine Soap Mold MachineThe soap shaping trimmer is designed specifically for soap bar mold release and auxiliary processing. It adopts an efficient driving mode, can adapt to various soap bars in different shapes, such as circular soap bars, square soap bars, oval soap bars and various soap bars specially designed, and is suitable for soap production and processing scenarios. The soap shaping trimmer can effectively improve the soap bar processing efficiency and the quality of finished products. Speed 3 seconds per soap bar Driving mode Pneumatic Air pressure 0.5-0.8Mpa Pushing force 400-600kg Main material Aluminum Material of mold cutter Carbon steel Size of mold cutter opening 78*58mm (3.1*2.3 inches) Maximum size of mold cutter opening 100*80mm (3.9*3.2 inches) Maximum length of soap bar 500mm (19.7 inches) Product size 196x17x23cm (77.2x6.7x9.1 inches) Net weight 28kg (61.7LBS) Note: The machine is not equipped with an air source, and the customers should use their own air pump or air compressor.Attention
1. In the operating process, it is strictly prohibited to make hands, arms or other body parts close to the moving parts of the machine (such as the clamping mold, the roller and the air cylinder push rod), and it is strictly prohibited to place tools and other things in the working area of the machine to prevent safety accidents such as squeezing and collision.
2. When the machine is running, if there is abnormal noise (such as the metal friction sound and air pressure leakage sound), vibration or running lag, the air valve switch should be immediately turned off to stop the machine, the air source should be disconnected, and then troubleshooting (such as checking for loose components, blocked air circuits and the abnormal air cylinders) should be conducted. After troubleshooting, the machine can be restarted.
3. After the work is finished every day, the air source must be turned off, the main air circuit connection of the machine must be disconnected, the surface of the machine, the clamping mold, the roller and other parts are wiped with dry soft cloth, the soap shavings, dust and other debris are cleaned away, and the machine is kept clean.
The core components inside the machine body are made of aluminum alloy materials which have the characteristics of lightweight, corrosion resistance and high strength. The overall structure has been optimized and designed, components are accurately assembled, and the stable working state can be kept for a long time. The machine adopts an air cylinder driving mode, and the core function is to stably push the soap bar out of the cutting mold. The driving force of the air cylinder is balanced to ensure the mold release process of the soap bar is stable, the operating process is smooth and free of any lag, and the soap bar is prevented from breakage. The air valve switch can accurately control the air cylinder to drive the push rod to move forward and backward in the working process, and is simple in structure and convenient to operate. The pushing block can be driven to push the soap bar stably and smoothly and is made of POM materials, achieving soft contact with the soap bar and avoiding damage to the soap bar. The clamping strips can be adjusted to adapt to different soap bars, well meeting different clamping requirements and effectively preventing the soap bar from deviating. The roller can be adjusted up and down according to the hardness of the soap bar, so the adaptability is greatly enhanced. The trimming mold facilitates trimming and mold release of the soap bar, and the flatness and smoothness of the soap bar can be greatly improved. The processed soap bar can be stably supported by the supporting plate in the working process, and the processing quality is well guaranteed.Operation Method
A. Preparation before starting
1. Check the air circuit system: Confirm that the air pipe connection is not loose or damaged, the air circuit connector is well sealed, and there is no air leakage.
2. Air pressure detection: Check the air pressure value through an air pressure gauge. The normal working air pressure range is 0.5-0.8MPa. If the air pressure does not meet the standard, the air source pressure needs to be adjusted to the standard range.
B. Material clamping and parameter adjustment
1. After connecting the air pipes and confirming that the air pressure is normal, place the to-be-processed soap bar smoothly into the clamping mold, and ensure that the soap bar does not deviate in the clamping mold.
2. Use an appropriate wrench to lock the fixing screws on the clamping strips to prevent displacement of the soap bar during processing.
3. Adjust the position of the roller: Use a tool to rotate the roller adjusting screws so that the lower edge of the roller can be about 5 millimeters lower than the upper surface of the soap bar. Specific adjustments should be conducted in conjunction with the hardness of the soap bar: When the hardness of the soap bar is high, the roller can be adjusted downwards appropriately; and when the hardness of the soap bar is low, the roller can be adjusted upwards appropriately to ensure the soap bar can be stably pressed during processing.
C. Starting and Operation
After confirming that the clamping and adjustment are correct, manually turn on the air valve switch, start the machine, and the device enters the working state. The air cylinder pushes the soap bar to complete the mold release or processing motion.
Maintenance
1. Weekly inspection of the air circuit system: Clean the accumulated water and impurities in the air circuit filter, check the aging condition of the air pipes, and replace the air pipes timely if cracking or aging of the air pipes is found.
2. Monthly inspection of the internal components of the machine body: Check whether the aluminum alloy parts are corroded or deformed, check the fastening condition of the fixing screws and roller adjustment screws, and tighten the screws in a timely manner if they are loose.
3. Quarterly maintenance of the air cylinder: Check if the air cylinder sealing parts are intact. If there is air leakage or the push rod is not running smoothly, replace the sealing parts or contact professional personnel for inspection.
Product DisplayItem Number (057224): 1 x Pneumatic Soap Shaping Trimmer
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Warranty & response▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
On Nov 7, 2025 at 19:43:44 PST, seller added the following information:
On Nov 11, 2025 at 04:52:33 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.