Model 1009 from Pathway Connectivity is a One in / Four out eDIN DMX/RDM Opto-splitter that provides full isolation between ports and RDM-compatibility. This DIN-rail mountable four-way opto-splitter supports the bi-directional communication standard E1.20 Remote Device Management (“RDM”), as well as DMX512. This model is used in installations that require ‘star’ wiring configurations, all output ports are separate electrical entities, fully opto-isolated and independently protected against fault voltages.
Pathway eDIN DMX/RDM Splitters support the bi-directional communications necessary for E1.20 Remote Device Management in DMX512 installations requiring star-wiring. Full opto-isolation between all ports adds maximum protection against common mode voltages or ground faults for connected equipment.
Pathway 1009 Includes:
- DIN tray (housing) with end caps
- 12” (300mm) x 35mm DIN rail
- Installation/Operations manual
Pathway 1009 Features:
- One DMX512 /RDM input port
- Four fully isolated DMX512/RDM bi-directional output ports
- One active DMX512/RDM bi-directional thru port
- Pluggable terminal blocks for all connectors
- Power and data easily daisy-chained between modules
- DMX IN indicator
- DC Power input indicator
- ISO 5V indicator
- Auto-termination of DMX THRU
- No fuses— self-resetting port protection recovers from voltage faults
Pathway 1009 Specifications:
- Model: 1009
- Additional specifications: 2500V opto-isolation between input and output ports
- 250V fault protection on input and output ports
- Input operating voltage: 9-30 VDC
- 6W power consumption
- Operating conditions: -10° to +50°C; 10-90% relative humidity, E1.11 DMX512-A(2008)/USITT DMX512(1990)
- ANSI E1.20 RDM(2010) - Remote Device Management
- RoHS 2002/95/EC
- Class 2 Low 0.70 lbs (0.316 kg)
- Dimensions: 3.6”W x 6.25”L x 1.5”H (91mm x 160mm x 38mm)
NOTE:
The eDIN DMX/RDM Splitter features terminal strips that can be removed from the card to facilitate easy wiring installation or replacement. Make the following connections, WITH THE POWER TURNED OFF, and observe ESD precautions by ensuring the installer is properly grounded before handling the module.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.