PJRC Teensy 4.1 iMXRT1062 microcontroller development board with Ethernet Kit. 600 MHz ARM Cortex-M7, USB host, SD card socket, 10/100 Ethernet, breadboardâÂÂfriendly I/O, 42 I/O pins. Kit includes MagJack; assembly required. Authorized PJRC distributor. Ships from Colorado with free USPS tracking.
Electronics for IoT, Prototyping & DIY
PJRC Teensy 4.1 iMXRT1062 Microcontroller Development Board w/ Ethernet Kit
PJRC Teensy 4.1 iMXRT1062 microcontroller development board with Ethernet Kit. 600 MHz ARM Cortex-M7, USB host, SD card socket, 10/100 Ethernet, breadboardâfriendly I/O, 42 I/O pins. Kit includes MagJack; assembly required. Authorized PJRC distributor. Ships from Colorado with free USPS tracking.
Teensy 4.1 iMXRT1062 Microcontroller Development Board by PJRC with Ethernet Kit
Teensy 4.1 is the latest Teensy microcontroller development board from PJRC. It features an ARM Cortex-M7 IMXRT1062 processor at 600 MHz. The actual size is 2.4 by 0.7 inch, the same form-factor as Teensy 3.6.
This kit includes the Teensy 4.1 Microcontroller board with a Teensy 4.1 Ethernet Kit. This kit has all the parts needed to connect to the Ethernet port on the Teensy 4.1. Itincludes an Ethernet MagJack, bare circuit board, ribbon cable assembly, 2 header pins, and a capacitor. DIY soldering is required to assemble the kit (the Teensy 4.1 board is fully assembled and tested).
Teensy 4.1 uses the same processor as Teensy 4.0, but provides greater I/O capability, including an ethernet PHY, SD card socket, and USB host port. Teensy 4.1 also comes with 4X larger flash memory, and has 2 locations to optionally add more memory.
Technical Specifications compared to Teensy 4.1
Teensy 4.1 & 4.0 use the same IMXRT1062, so most technical specifications are the same.
Please refer to the Teensy 4.0 page for common specifications and features.
FeatureTeensy 4.1Teensy 4.0Ethernet10 / 100 Mbit
DP83825 PHY
(6 pins)-none-USB Host5 Pins with
power management2 SMT PadsSDIO (4 bit data)Micro SD Socket8 SMT PadsPWM Pins3531Analog Inputs1814Serial Ports87Flash Memory8 Mbyte2 MbyteQSPI Memory2 chips
Plus Program MemoryProgram memory onlyBreadboard Friendly I/O4224Bottom SMT Pad Signals716SD Card Signals60Total I/O Pins5540
Pinouts
Teensy 4.1 is designed to bring all general purpose I/O pins to breadboard friendly pads on the outside edges.
Note:The Teensy 4.1 does not include headers and, if needed in your application, will need to be purchased separately and soldered on yourself.
Package Includes:
1x PJRC Teensy 4.1 Microcontroller Development Board without pins
1x Teensy 4.1 Ethernet Kit (assembly and soldering required)
Printed pinout and usage reference card
Envistia Mall is an authorized PJRC Teensy distributor.
Stocks and ships from the USA.
We provide FREE USPS Ground Advantage Shipping with Tracking - Not Economy Shipping
Featured Products
PJRC Teensy 4.1 iMXRT1062 Microcontroller Development Board w/ SD Card, Ethernet
$37.50
Audio Adapter Shield 4.0 for Teensy 4.0 & 4.1 w/ Male & Female Headers
$15.20
MEGA2560 PRO MINI ATmega2560-16AU CH340G Development Board
$18.89
MEGA2560 R3 ATmega2560-16AU CH340G Development Board with or without Cable
$23.49
PJRC Teensy 4.0 iMXRT1062 Microcontroller Development Board Unlocked & Lockable
$23.80
Digispark Kickstarter Attiny85 USB General Micro Development Board
$7.89
ATTINY85 USB-C Development Board for Arduino & Digispark Kickstarter
$8.29
CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board Module US
$6.29 Add suggested items to your listings - Check it out on 3Dsellers.com
· All Rights Reserved to My Store ·
listing template by 3Dsellers.com - Try for Free!
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.