|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
PELCO DD436-X PAL DOME DRIVE
$1,995.00

Pelco DD436-X | ±0.1° Preset Accuracy | Image Enhancement (36X model) | RJ-45 Data Port for Software Update and Setup | Password Protection | Spectra IV IP Dome Drive. Buy Now. The DD436-X from Pelco is a Spectra IV IP Dome Drive for Day/Night Camera, 36X Optical Zoom, PAL. All cameras in Spectra IV IP dome drives feature an EXview HAD imager for increased sensitivity and LowLight technology allowing the cameras to compensate for scenes where minimal light is present. Both the 29X and the 36X cameras feature built-in motion detection and advanced 128X wide dynamic range (WDR) that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 36X day/night camera\'s electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic. ±0.1° Preset AccuracyElectronic Image Stabilization (36X model)Image Enhancement (36X model)Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech)RJ-45 Data Port for Software Update and SetupOn-Screen Compass, Tilt, and Zoom DisplayPassword Protection400°/sec Pan Preset Speed and 200°/sec Tilt Preset SpeedRotating Discreet Liner with Sealed Fixed BubbleWindow Blanking: Up to 8, Four-Sided, User-Defined Shapes8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each or Set to Output Blank Video7 Alarm Inputs1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output (can be alternately configured to operate upon alarm)Configurable Locations of Labels and On-Screen DisplaysAction on Alarm: Alarms Can Be Individually Configured for 3 Priority Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset When ReceivedResume After Alarm: Allows the Dome to Return to a Previously Configured State After Alarm Acknowledgement or to its Previous Position Before AlarmMultiple Park and Power-Up ActionPatterns: Up to 8, On-Screen, User-Defined Configurable Patterns; Includes Pan, Tilt, Zoom, and Preset FunctionsProportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of ZoomVariable Scan Speed: Scan Speed Can Be Configurable Between 1 to 40°/secPan Motion Allows 0.1° to 150°/sec Pan SpeedConfigurable Limit Stops for Auto/Random/Frame Scan ModesAutosensing Protocol (Coaxitron, RS-422 Pelco P and Pelco D, Sensormatic, Vicon); Accepts Other Control Protocols with Optional Translator CardDigital Position and Zoom Control and response Through Pelco D ProtocolBuilt-in Menu System for Setup of Configurable Functions\"Auto Flip\" Rotates Dome 180° at Bottom of Tilt TravelConfigurable Zoom SpeedsFreeze Frame During PresetsLow Lux Noise Reduction

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|